pve-cluster (5.0-10) unstable; urgency=medium

  * pvecm delnode: prevent deleting current node

  * factor out corosync methods to own module

  * pmxcfs: fix segfault in cfs_create_status_msg

  * add sshinfo_to_command_base

  * mtunnel: add -run-command for insecure pipes

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Jun 2017 08:29:29 +0200

pve-cluster (5.0-9) unstable; urgency=medium

  * Remove a wrong warning message from pmxcfs.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Jun 2017 09:38:12 +0200

pve-cluster (5.0-8) unstable; urgency=medium

  * sshinfo: add the network cidr

  * Fix #1383: pmxcfs: use memdb_tree_entry_free()

  * Cluster.pm: add get_ssh_info and ssh_info_to_command

  * add replication.cfg to observed files

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 May 2017 09:11:06 +0200

pve-cluster (5.0-7) unstable; urgency=medium

  * remove storage_replication_network setting from datacenter.cfg

  * fix #1369 - re-allow using hostnames for ringX_addr

 -- Proxmox Support Team <support@proxmox.com>  Mon, 15 May 2017 14:57:50 +0200

pve-cluster (5.0-6) unstable; urgency=medium

  * remove postinst script

 -- Proxmox Support Team <support@proxmox.com>  Wed, 03 May 2017 07:42:12 +0200

pve-cluster (5.0-5) unstable; urgency=medium

  * fix check refusing chmod when it should be allowed

  * add storage_replication_network setting to datacenter.cfg

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Apr 2017 13:58:54 +0200

pve-cluster (5.0-4) unstable; urgency=medium

  * allow chown and chmod on pmxcfs (for root:www-data / 0640)

  * fix install location of IPCC.so

 -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Apr 2017 15:53:16 +0200

pve-cluster (5.0-3) unstable; urgency=medium

  * rrd_dump: filter undefined values encodes as 'U'

 -- Proxmox Support Team <support@proxmox.com>  Fri, 17 Mar 2017 11:59:27 +0100

pve-cluster (5.0-2) unstable; urgency=medium

  * Rebuild with new corosync packages to correct dependencies

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Mar 2017 13:23:12 +0100

pve-cluster (5.0-1) unstable; urgency=medium

  * Rebuild for PVE 5.0 / Debian Stretch

  * Require Sys.Audit to read the cluster configuration

  * Fix vmid cast in pmxcfs

 -- Proxmox Support Team <support@proxmox.com>  Fri, 10 Mar 2017 13:03:20 +0100

pve-cluster (4.0-49) unstable; urgency=medium

  * pvecm add: assert that ringX IPs are available on node add

  * pvecm add: report all errors found at once

  * pvecm addnode: ensure ring1_addr is set if ring 1 is configured

  * pvecm addnode: ensure ring address isn't already used by cluster

  * pvecm addnode: error out on interactive call

  * pvecm create: remove rrp_mode parameter

  * pvecm add: fix check if corosync alread runs

  * Remove depency to libxml-parser-perl

  * buildsys: various cleanups

 -- Proxmox Support Team <support@proxmox.com>  Tue, 28 Feb 2017 12:02:56 +0100

pve-cluster (4.0-48) unstable; urgency=medium

  * add API class for cluster configuration

  * move corosync config helpers to PVE::Cluster

  * Fix #1199: pmxcfs: vmlist cache update condition in rename

  * pmxcfs: cleanup: remove unnecessary checks before free

  * new helper initialize_cert_cache()

  * moved x509 certificate cache helpers from pve-manager package

  * setup_sshd_config: add start_sshd flag

  * pvecm.pm: add space after perl reference operator

  * error out when getting remote ip address fails

  * get_local_migration_ip: change to a reasonable error message

  * set PERLIB=.. instead of overwriting rules from pve-doc-generator.mk

  * do not set format_description for migration type property

  * removed unused script gen-datacenter-pod.pl

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Nov 2016 12:00:11 +0100

pve-cluster (4.0-47) unstable; urgency=medium

  * add migration format to datacenter config

  * add 'mtunnel' to pvecm

  * add get_local_migration_ip method

 -- Proxmox Support Team <support@proxmox.com>  Thu, 03 Nov 2016 08:40:21 +0100

pve-cluster (4.0-46) unstable; urgency=medium

  * Fix #1093: allow also delete node by IP

  * reload corosync.conf after removing a node

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Sep 2016 09:36:22 +0200

pve-cluster (4.0-45) unstable; urgency=medium

  * pmxcfs: increase max filesize from 128k to 512k

 -- Proxmox Support Team <support@proxmox.com>  Tue, 13 Sep 2016 06:30:13 +0200

pve-cluster (4.0-44) unstable; urgency=medium

  * add mac_prefix option to datacenter.cfg

 -- Proxmox Support Team <support@proxmox.com>  Fri, 19 Aug 2016 14:51:35 +0200

pve-cluster (4.0-43) unstable; urgency=medium

  * ensure quorum is set false when corosync fails

  * cleanup format strings for cfs_* messages

 -- Proxmox Support Team <support@proxmox.com>  Mon, 11 Jul 2016 13:57:08 +0200

pve-cluster (4.0-42) unstable; urgency=medium

  * Fix command line arguments when creating the ssl private key

 -- Proxmox Support Team <support@proxmox.com>  Tue, 14 Jun 2016 09:56:01 +0200

pve-cluster (4.0-41) unstable; urgency=medium

  * use UUID for CA certificate subject

  * cleanup calls to external programs

 -- Proxmox Support Team <support@proxmox.com>  Fri, 10 Jun 2016 13:06:19 +0200

pve-cluster (4.0-40) unstable; urgency=medium

  * pvecm: remove RPCEnvironment use clause

  * fix rule for %.1-synopsis.adoc

  * docs: replace NOTE: with WARNING:

  * Fix #935: fix corosync.conf check

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 May 2016 11:37:08 +0200

pve-cluster (4.0-39) unstable; urgency=medium

  * Build-Depend on pve-doc-generator

  * generate man pages with pve-doc-generator

 -- Proxmox Support Team <support@proxmox.com>  Wed, 06 Apr 2016 17:43:36 +0200

pve-cluster (4.0-38) unstable; urgency=medium

  * allow empty values in rrddata

 -- Proxmox Support Team <support@proxmox.com>  Thu, 31 Mar 2016 10:33:07 +0200

pve-cluster (4.0-37) unstable; urgency=medium

  * Add warning for pvecm commands if not part of cluster

 -- Proxmox Support Team <support@proxmox.com>  Tue, 15 Mar 2016 16:44:50 +0100

pve-cluster (4.0-36) unstable; urgency=medium

  * fix #904: wrap openssl with faketime

 -- Proxmox Support Team <support@proxmox.com>  Mon, 14 Mar 2016 08:34:47 +0100

pve-cluster (4.0-35) unstable; urgency=medium

  * add 'fencing' to datacenter.cfg

 -- Proxmox Support Team <support@proxmox.com>  Fri, 04 Mar 2016 17:01:09 +0100

pve-cluster (4.0-34) unstable; urgency=medium

  * always start rrd grephs at 0

 -- Proxmox Support Team <support@proxmox.com>  Sat, 27 Feb 2016 09:38:04 +0100

pve-cluster (4.0-33) unstable; urgency=medium

  * add check for int overflow on vmids

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 Feb 2016 19:08:21 +0100

pve-cluster (4.0-32) unstable; urgency=medium

  * add 'max_workers' to datacenter.cfg

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Feb 2016 10:00:54 +0100

pve-cluster (4.0-31) unstable; urgency=medium

  * Use correct key usage in node SSL certificate

  * Change CA SSL key size to 4096 bit

 -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Jan 2016 17:16:40 +0100

pve-cluster (4.0-30) unstable; urgency=medium

  * ipcc_send_rec: clear errno if we get a valid result

 -- Proxmox Support Team <support@proxmox.com>  Sat, 26 Dec 2015 19:11:13 +0100

pve-cluster (4.0-29) unstable; urgency=medium

  * qb_loop_timer_add: do not use small timeouts (avoid startup
    problems at boot time)

  * add/use dfsm_is_initialized to avoid unnecessary error logs at startup

 -- Proxmox Support Team <support@proxmox.com>  Fri, 04 Dec 2015 13:51:42 +0100

pve-cluster (4.0-28) unstable; urgency=medium

  * start pve-cluster before cron, because cron config can be
    on /etc/pve (vzdump backup jobs)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 02 Dec 2015 13:26:48 +0100

pve-cluster (4.0-27) unstable; urgency=medium

  * start pve-cluster before ceph, because ceph config can be on /etc/pve

 -- Proxmox Support Team <support@proxmox.com>  Wed, 02 Dec 2015 13:03:31 +0100

pve-cluster (4.0-26) unstable; urgency=medium

  * add Wants=rrdcached.service to pve-cluster.service

 -- Proxmox Support Team <support@proxmox.com>  Tue, 24 Nov 2015 12:42:44 +0100

pve-cluster (4.0-25) unstable; urgency=medium

  * add 'ha/fence.cfg' to observed files

 -- Proxmox Support Team <support@proxmox.com>  Wed, 18 Nov 2015 10:49:01 +0100

pve-cluster (4.0-24) unstable; urgency=medium

  * fix bug #790: Remove decode from log_msg

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Oct 2015 17:38:15 +0100

pve-cluster (4.0-23) unstable; urgency=medium

  * corosync: implement RRP support

  * sysctl : fs.aio-max-nr = 10485

 -- Proxmox Support Team <support@proxmox.com>  Tue, 13 Oct 2015 17:02:14 +0200

pve-cluster (4.0-22) unstable; urgency=medium

  * check_vmid_unused: fix error message

 -- Proxmox Support Team <support@proxmox.com>  Mon, 05 Oct 2015 13:16:05 +0200

pve-cluster (4.0-21) unstable; urgency=medium

  * add function to lock a domain

 -- Proxmox Support Team <support@proxmox.com>  Sat, 26 Sep 2015 10:31:25 +0200

pve-cluster (4.0-20) unstable; urgency=medium

  * convert pvecm into a PVE::CLI class

  * install bash completion configuration file

 -- Proxmox Support Team <support@proxmox.com>  Fri, 25 Sep 2015 13:03:06 +0200

pve-cluster (4.0-19) unstable; urgency=medium

  * check_vmid_unused: improved error message

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Sep 2015 07:56:52 +0200

pve-cluster (4.0-18) unstable; urgency=medium

  * add another bash completion helper: complete_vmid

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Sep 2015 09:19:11 +0200

pve-cluster (4.0-17) unstable; urgency=medium

  * add some bash completion helpers

 -- Proxmox Support Team <support@proxmox.com>  Tue, 08 Sep 2015 07:21:34 +0200

pve-cluster (4.0-16) unstable; urgency=medium

  * avoid warnings if there is no /etc/pve/datacenter.cfg

 -- Proxmox Support Team <support@proxmox.com>  Tue, 01 Sep 2015 10:43:30 +0200

pve-cluster (4.0-15) unstable; urgency=medium

  * use simple files for LXC configuration (instead of subdirs)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 06 Aug 2015 11:22:05 +0200

pve-cluster (4.0-14) unstable; urgency=medium

  * add new observed file status.cfg

 -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Jun 2015 09:36:53 +0200

pve-cluster (4.0-13) unstable; urgency=medium

  * pvecm: avoid warning about uninitialized value

 -- Proxmox Support Team <support@proxmox.com>  Fri, 19 Jun 2015 07:33:37 +0200

pve-cluster (4.0-12) unstable; urgency=medium

  * remove debian trigger for pve-api-updates

 -- Proxmox Support Team <support@proxmox.com>  Mon, 01 Jun 2015 12:22:41 +0200

pve-cluster (4.0-11) unstable; urgency=medium

  *  allow sshd root login when we setup a PVE cluster

 -- Proxmox Support Team <support@proxmox.com>  Fri, 29 May 2015 14:45:35 +0200

pve-cluster (4.0-10) unstable; urgency=medium

  * add IPv6 support

 -- Proxmox Support Team <support@proxmox.com>  Fri, 08 May 2015 12:24:06 +0200

pve-cluster (4.0-9) unstable; urgency=medium

  * trigger pve-api-updates event

 -- Proxmox Support Team <support@proxmox.com>  Tue, 05 May 2015 15:13:41 +0200

pve-cluster (4.0-8) unstable; urgency=medium

  * allow unpriviledged users to read lxc configuration

  * new helper PVE::Cluster::check_vmid_unused

 -- Proxmox Support Team <support@proxmox.com>  Thu, 16 Apr 2015 07:15:31 +0200

pve-cluster (4.0-7) unstable; urgency=medium

  * track configuration changes inside lxc subdirectories

 -- Proxmox Support Team <support@proxmox.com>  Fri, 10 Apr 2015 08:31:12 +0200

pve-cluster (4.0-6) unstable; urgency=medium

  * observe more files (improve change tracking)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 27 Mar 2015 10:54:53 +0100

pve-cluster (4.0-5) unstable; urgency=medium

  * fix tracking of corosync configuration changes

 -- Proxmox Support Team <support@proxmox.com>  Fri, 20 Mar 2015 09:43:14 +0100

pve-cluster (4.0-4) unstable; urgency=medium

  * fix corosync cmap reader

 -- Proxmox Support Team <support@proxmox.com>  Wed, 18 Mar 2015 15:08:48 +0100

pve-cluster (4.0-3) unstable; urgency=medium

  * use systemctl to start/stop services

 -- Proxmox Support Team <support@proxmox.com>  Fri, 13 Mar 2015 11:35:00 +0100

pve-cluster (4.0-2) unstable; urgency=medium

  * fix perl api dependency (perlapi-5.20.0)

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Mar 2015 06:44:45 +0100

pve-cluster (4.0-1) unstable; urgency=medium

  * updated for Debian Jessie

  * use corosync votequorum instead of cman

  * add systemd support
  
  * depend on glib >= 2.42

  * depend on corosync => 2.3.4

  * depend on libqb 0.17.1-1

 -- Proxmox Support Team <support@proxmox.com>  Mon, 23 Feb 2015 16:11:23 +0100

pve-cluster (3.0-17) unstable; urgency=low

  * add ability to update cfs locks

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Feb 2015 11:56:06 +0100

pve-cluster (3.0-16) unstable; urgency=low

  * recompile, and include new package with debug information

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Feb 2015 17:11:00 +0100

pve-cluster (3.0-15) unstable; urgency=low

  * datacenter.cfg: add new email_from option

 -- Proxmox Support Team <support@proxmox.com>  Thu, 04 Sep 2014 17:31:34 +0200

pve-cluster (3.0-14) unstable; urgency=low

  * datacenter.cfg: add new value for console setting (html5)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Jun 2014 06:22:58 +0200

pve-cluster (3.0-13) unstable; urgency=low

  * fix bug 204: use DERIVE instead of COUNTER

 -- Proxmox Support Team <support@proxmox.com>  Wed, 30 Apr 2014 07:19:50 +0200

pve-cluster (3.0-12) unstable; urgency=low

  * fix bug #489: debend on libfuse 2.9.2-4 from jessy

 -- Proxmox Support Team <support@proxmox.com>  Mon, 27 Jan 2014 11:49:27 +0100

pve-cluster (3.0-11) unstable; urgency=low

  * stop service 'pve-cluster' after stopping 'ceph'

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Jan 2014 07:46:35 +0100

pve-cluster (3.0-10) unstable; urgency=low

  * start service 'pve-cluster' before starting 'ceph'

 -- Proxmox Support Team <support@proxmox.com>  Tue, 31 Dec 2013 06:35:29 +0100

pve-cluster (3.0-9) unstable; urgency=low

  * datacenter.cfg: add new console setting (applet/vv)

 -- Proxmox Support Team <support@proxmox.com>  Tue, 10 Dec 2013 06:18:56 +0100

pve-cluster (3.0-8) unstable; urgency=low

  * use warnings instead of global -w flag

 -- Proxmox Support Team <support@proxmox.com>  Tue, 01 Oct 2013 13:24:54 +0200

pve-cluster (3.0-7) unstable; urgency=low

  * suppress another warning about uninitialized value at boot time

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Aug 2013 10:39:18 +0200

pve-cluster (3.0-6) unstable; urgency=low

  * avoid warning when adding a new node (can't create shared ssh key database...)
  
  * avoid warning if /etc/pve/priv/ already exists

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Aug 2013 08:58:17 +0200

pve-cluster (3.0-5) unstable; urgency=low

  * add migration_unsecure param to datacenter.cfg
  
 -- Proxmox Support Team <support@proxmox.com>  Fri, 26 Jul 2013 11:06:30 +0200

pve-cluster (3.0-4) unstable; urgency=low

  * depend on fuse (seems most utilities moved from fuse-utils to fuse)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 May 2013 11:42:15 +0200

pve-cluster (3.0-3) unstable; urgency=low

  * remove depencency on fuse-utils (this package is no longer required)
  
  * fix warning about uninitialize value

 -- Proxmox Support Team <support@proxmox.com>  Thu, 16 May 2013 12:47:03 +0200

pve-cluster (3.0-2) unstable; urgency=low

  * remove all references to apache2 (no longer required)
  
  * fix bug 383: resteart pveproxy instead of apache2

 -- Proxmox Support Team <support@proxmox.com>  Tue, 14 May 2013 10:50:06 +0200

pve-cluster (3.0-1) unstable; urgency=low

  * bump version for wheezy
  
  * use libqb0 from wheezy
  
  * use new perl version 5.14.2 from wheezy
  
  * try to load fuse modules on startup

 -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Mar 2013 06:58:00 +0100

pve-cluster (1.0-37) unstable; urgency=low

  * ssh-copy-id: never use keys provided by the ssh-agent

 -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Feb 2013 09:24:47 +0100

pve-cluster (1.0-36) unstable; urgency=low

  * add another field (status) to new pve2.3-vm rrd format

 -- Proxmox Support Team <support@proxmox.com>  Thu, 17 Jan 2013 09:27:19 +0100

pve-cluster (1.0-35) unstable; urgency=low

  * add new pve2.3-vm rrd stream (include template value)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Jan 2013 09:55:35 +0100

pve-cluster (1.0-34) unstable; urgency=low

  * implement sendfd to support qemu fdset functionality.
  
  * fix ssh_merge_keys

 -- Proxmox Support Team <support@proxmox.com>  Wed, 05 Dec 2012 12:02:09 +0100

pve-cluster (1.0-33) unstable; urgency=low

  * import existing /root/.ssh/authorized_keys

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Nov 2012 10:26:05 +0100

pve-cluster (1.0-32) unstable; urgency=low

  * do not pass undef tp RRDs::graphv (use '' instead)

 -- Proxmox Support Team <support@proxmox.com>  Sat, 03 Nov 2012 07:41:42 +0100

pve-cluster (1.0-31) unstable; urgency=low

  * also initialize /root/.ssh with 'pvecm updatecerts'. That way we
    create a default /root/.ssh/config when updating this package.

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 Oct 2012 14:22:38 +0100

pve-cluster (1.0-30) unstable; urgency=low

  * create /root/.ssh/config and set default Chiphers

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 Oct 2012 13:47:17 +0100

pve-cluster (1.0-29) unstable; urgency=low

  * fix caching problems in create_rrd_graph (do not save any data to files)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 Oct 2012 07:12:10 +0100

pve-cluster (1.0-28) unstable; urgency=low

  * preserve authorized_key key order

 -- Proxmox Support Team <support@proxmox.com>  Fri, 31 Aug 2012 07:35:32 +0200

pve-cluster (1.0-27) unstable; urgency=low

  * fix bug #199: allow node names to start with numbers

 -- Proxmox Support Team <support@proxmox.com>  Tue, 22 May 2012 11:53:02 +0200

pve-cluster (1.0-26) unstable; urgency=low

  * new rrd format for node data (skip 2 entries). 

 -- Proxmox Support Team <support@proxmox.com>  Mon, 26 Mar 2012 09:46:47 +0200

pve-cluster (1.0-25) unstable; urgency=low

  * use Digest::SHA instead of Digest::SHA1

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Mar 2012 11:24:21 +0100

pve-cluster (1.0-24) unstable; urgency=low

  * avoid dcdb warnings when creating a new cluster

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Mar 2012 07:51:27 +0100

pve-cluster (1.0-23) unstable; urgency=low

  * fix for pvecm add: avoid ambiguous options

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Feb 2012 11:07:23 +0100

pve-cluster (1.0-22) unstable; urgency=low

  * depend on insserv (we need dependency based boot)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 16 Feb 2012 10:51:20 +0100

pve-cluster (1.0-21) unstable; urgency=low

  * use new qb_log_filter_fn_set

 -- Proxmox Support Team <support@proxmox.com>  Wed, 15 Feb 2012 06:59:52 +0100

pve-cluster (1.0-20) unstable; urgency=low

  * new helper: create_pmxcfs_db
  
  * show error messages in init.d script (remove -q daemon option)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 18 Jan 2012 10:59:41 +0100

pve-cluster (1.0-19) unstable; urgency=low

  * use new helper PVE::Tools::kvmkeymaplist()

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Jan 2012 11:39:19 +0100

pve-cluster (1.0-18) unstable; urgency=low

  * fix database load bug.

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Jan 2012 08:23:47 +0100

pve-cluster (1.0-17) unstable; urgency=low

  * depend on libxml-parser-perl

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Dec 2011 13:50:13 +0100

pve-cluster (1.0-16) unstable; urgency=low

  * fix online status calculation

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Dec 2011 09:21:44 +0100

pve-cluster (1.0-15) unstable; urgency=low

  * add interface to read/write cluster.conf

 -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Dec 2011 07:16:48 +0100

pve-cluster (1.0-14) unstable; urgency=low

  * fix file name: use cluster.conf instead of cluster.cfg

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Dec 2011 06:56:06 +0100

pve-cluster (1.0-13) unstable; urgency=low

  * do not restart rsyslogd

 -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Dec 2011 08:11:46 +0100

pve-cluster (1.0-12) unstable; urgency=low

  * use full-size-mode for RRD graph

  * depend on libdigest-hmac-perl
  
  * start before cron

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Nov 2011 13:28:58 +0100

pve-cluster (1.0-11) unstable; urgency=low

  * restart pvedaemon after cluster 'add'
  
 -- Proxmox Support Team <support@proxmox.com>  Tue, 15 Nov 2011 09:14:30 +0100

pve-cluster (1.0-10) unstable; urgency=low

  * add vzdump backup schedule to observed file list

  * generate vzdump setup file /etc/pve/vzdump.cron
    
  * Also create a symlink /etc/cron.d/vzdump to that file.

  * protect IPCC against fork
  
  * bug fixes

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Nov 2011 10:11:50 +0100

pve-cluster (1.0-9) unstable; urgency=low

  * restart filesystem after update asap

 -- Proxmox Support Team <support@proxmox.com>  Tue, 04 Oct 2011 07:28:02 +0200

pve-cluster (1.0-8) unstable; urgency=low

  * set exec permission on openvz action scripts

 -- Proxmox Support Team <support@proxmox.com>  Mon, 03 Oct 2011 07:58:05 +0200

pve-cluster (1.0-7) unstable; urgency=low

  * fixes for rrdcached
  
  * fix cfs_plug_link_getattr

 -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Aug 2011 08:15:16 +0200

pve-cluster (1.0-6) unstable; urgency=low

  * removed pvecert binray (use pvecm instead)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 10 Aug 2011 07:55:41 +0200

pve-cluster (1.0-5) unstable; urgency=low

  * fix known_hosts handling (use /etc/ssh/ssh_known_hosts)

 -- Proxmox Support Team <support@proxmox.com>  Tue, 09 Aug 2011 14:32:20 +0200

pve-cluster (1.0-4) unstable; urgency=low

  * also handle ssh known_hosts file

 -- Proxmox Support Team <support@proxmox.com>  Tue, 09 Aug 2011 08:21:12 +0200

pve-cluster (1.0-3) unstable; urgency=low

  * new virtual file to enabe/disable debugging

 -- Proxmox Support Team <support@proxmox.com>  Mon, 08 Aug 2011 08:54:06 +0200

pve-cluster (1.0-2) unstable; urgency=low

  * fix 'pvecm create'

 -- Proxmox Support Team <support@proxmox.com>  Fri, 05 Aug 2011 12:31:44 +0200

pve-cluster (1.0-1) unstable; urgency=low

  * Initial release

 -- Proxmox Support Team <support@proxmox.com>  Wed, 03 Feb 2010 13:51:39 +0100