pve-manager (6.4-5) pve; urgency=medium * always reload API daemons after a new Ceph installation to ensure the newest Ceph libraries are loaded. -- Proxmox Support Team Mon, 03 May 2021 15:06:43 +0200 pve-manager (6.4-4) pve; urgency=medium * ceph monitor: automatically disable insecure global ID reclaim after creating first monitor * pveceph: drop left-over, now bogus, warning when installing Octopus. Ceph Octopus is supported and stable since Proxmox VE 6.3 -- Proxmox Support Team Tue, 27 Apr 2021 13:03:54 +0200 pve-manager (6.4-3) pve; urgency=medium * ui: tasks: add ceph edit-pool and set-flags descriptions * ui: ceph: pool edit: set emptyValue to 0 for target-size field * ui: storage RBD: add field allowing one to configure accessing a specific, already existing namespace of a RBD pool for a Proxmox VE storage. * SDN tech preview: add subnet/ipam/sdn management -- Proxmox Support Team Mon, 26 Apr 2021 20:19:56 +0200 pve-manager (6.4-2) pve; urgency=medium * ui: ceph pools: fix target-size column renderer * ui: ceph pools: do not grey-out name field when editing a pool * ui: ceph pools: avoid resetting crush rule when editing a pool * ui: container restore: make privilege level of restored CT a tri-state radio group to allow keeping the old state (default), or enforcing either privileged or unprivileged * ui: ceph: pool creation: default auto-scale value to "on". -- Proxmox Support Team Sat, 24 Apr 2021 19:28:55 +0200 pve-manager (6.4-1) pve; urgency=medium * backup views: add single-file restore button for VM and CT backup archives located on a Proxmox Backup Server * ui: ceph: allow one to edit existing ceph pools * ui: ceph: reduce pool view complexity and add auto scale columns * fix #2053: OSD destroy only if located on specified node * ui: Utils: change default console order for VMs, prefer SPICE virt-viewer if the VM has a SPICE display * fix #3389: add special file-upload detection and handling also when API tokens are used * fix #417: proxy: allow one to configure a address where the pveproxy and spiceproxy should listen and default to listening on both, IPv6 and IPv4. This changes the log format for IPv4 addresses, as ::ffff: will be prefixed. Either adpat any matching software (for example, fail2ban) or disable this by setting the LISTEN_IP to 0.0.0.0, if this is not wanted. * ui: safe destroy guest: add checkbox for removal of unreferenced disks * report: add multipath.conf and wwids file * fix #3385: api: network: check for duplicate use of network-device ports before writing * ui: firewall: rule: set 512 characters max-length for source and destination fields, if more addresses are required it's recommended to use IP-sets * ui: backup views: unfiy button order in storage and guest backup view * ui: set file name for spice console download in chrome * ui: allow one to edit notes also in the storage backup content view -- Proxmox Support Team Fri, 23 Apr 2021 17:17:29 +0200 pve-manager (6.3-7) pve; urgency=medium * ui: bandwidth limit selector: make it possible to allow zero, so users can reset any default imposed bandwidth restriction to unlimited * ui: avoid errors when 'template' property is not present in guest status * external metrics: influx: send along auth token on connection test too * external metrics: influx: allow one to add an API URL-path prefix, especially useful if InfluxDB runs behind a reverse proxy * ui: backups: enable editing notes for Proxmox Backup Server * ui: cloud-init: re-add SLAAC option to IPv6 configuration * vzdump: return backup job lock file handle and let the caller close it, ensuring that it is held during the whole job in a more straight-forward manner * ui: restore: add initially live-restore checkbox for backup archives on a Proxmox Backup Server * api: resources: return guest, pool and sdn info in a sorted manner -- Proxmox Support Team Thu, 15 Apr 2021 19:56:12 +0200 pve-manager (6.3-6) pve; urgency=medium * ui: VM hardware: extend machine renderer to show pinned machine versions for Windows VMs also in the Hardware overview. * ui: VM hardware: add online-help references to random number generator edit window -- Proxmox Support Team Tue, 09 Mar 2021 08:22:47 +0100 pve-manager (6.3-5) pve; urgency=medium * ui: firewall rules: make columns more responsive (flexible) by default * ui: firewall rules: for ellipsized comments * vzdump: Proxmox Backup Server: make task log upload error non-fatal * ui: zpool status detail: add default for scrub information * external metrics/status: fix misspelled method call * api: node: add new capabilities API endpoint, initially hosting the available QEMU machine list endpoint of a node. * ui: VM hardware: add option for version pinning in machine edit window * partially fix #2745: vzdump: use default for remove parameter -- Proxmox Support Team Fri, 05 Mar 2021 21:50:04 +0100 pve-manager (6.3-4) pve; urgency=medium * pveceph: improve useability of 'status' command * fix #3203: ui: VM hardware: use correct OS default model for network device type * ui: qemu: add the 'none' dummy audio driver as an option * metric-status: InfluxDB: add support for InfluxDB 2.x HTTPs API * metric-status plugin: do not test connection if disabled * fix #3066: ui: Node summary: add hostcpu/hostmem ratio fields for guest usage * ui: disk list: include partitions * ui: snapshot: show task viewer for progress log * ui: window/Settings: fix labelWidth for saved user name * ceph: extend error for wrong config-file link * ui: safe destroy: Add HA to purge tooltip * ui: dc/TokenEdit: fix editing existing tokens * ui: qemu/HardwareView: fix CDRom permission checks -- Proxmox Support Team Fri, 19 Feb 2021 17:53:32 +0100 pve-manager (6.3-3) pve; urgency=medium * pvestatd: adapt to new CGRoup module path * fix #3182 #3183: change backup retention mask logic * ui: fix various usages of the findRecord emthod, ensuring it matches exact * test: add regression tests for retention parameters for vzdump -- Proxmox Support Team Thu, 03 Dec 2020 18:14:45 +0100 pve-manager (6.3-2) pve; urgency=medium * fix #3140: allow interface suffix in dns entries * ui: storage: improve passint prune settings one edge cases * ui: add onlineHelp buttons for VM boot order, and some storage edit windows * api: metrics/server: test heuristically if we can connect successfully on add/update * api: metrics/server: add minimum and maximum to port schema -- Proxmox Support Team Wed, 25 Nov 2020 16:20:25 +0100 pve-manager (6.3-1) pve; urgency=medium * api: osd destroy: untaint device before pvremove * ui: storage content: add encryption and verification columns for Proxmox Backup Server * ui: guest backup view: add encrypted column for Proxmox Backup Server storages * ui: storage: Proxmox Backup Server paperkey: print short fingerprint in heading * ui: storage: Proxmox Backup Server: improve encryption key handling, allow upload of existing key, warn visible on deletion. -- Proxmox Support Team Tue, 24 Nov 2020 23:43:20 +0100 pve-manager (6.2-17) pve; urgency=medium * ui: ceph wizard: improve language and fix ceph docs link * ui: guest backup view: add ability to show and edit comments * ui: storage backup view: add button for prune group window * api: ceph: fix pool creation 'add as storage' parameter -- Proxmox Support Team Tue, 24 Nov 2020 16:01:42 +0100 pve-manager (6.2-16) pve; urgency=medium * apt: add libproxmox-backup-qemu0 to displayed packages * ui: qemu: set correct disabled state for start button * ui: guest backup: add comment and verification columns * ui: storage content: add comment column for backups * ui: storage/PBS: drop beta hint * ui: storage/PBS: allow one to copy, download or print new auto-generated encryption key * ui: fix extension filter for upload window for container templates * ui: storage content: use separate view for each content type * fix #3136: vzdump notification mail: add name also to plain-text part * ui: improve column behavior with browser scaling and non-default DPI * cluster: add 'metrics/server' API endpoints and user interface * ceph: do not require setting 'allow-experimental' flag when installing Octopus * ui: ceph: allow one to select which version to install * close #3114: ui: snapshots: make it harder to delete snapshot by accident * vzdump: adapt to new keep-all prune option * ui: storage edit: add Backup Retention tab for those storage with backup content type support. * ui: storage edit: drop max backup field, replaced by backup retention keep-last field -- Proxmox Support Team Mon, 23 Nov 2020 19:33:03 +0100 pve-manager (6.2-15) pve; urgency=medium * fix #2802: status/metrics: make MTU configurable for tunneled or otherwise MTU-reduced networks * ui: authentication: add "verify SSL cert" checkbox for AD realms * vzdump: fix regression with "keep forever" legacy handling logic of the older 'maxfiles' option, which makes problems if it was set explicitly to zero -- Proxmox Support Team Sun, 01 Nov 2020 20:34:56 +0100 pve-manager (6.2-13) pve; urgency=medium * tasks: allow API tokens to query their own UPIDs * ui: pbs: allow empty fingerprint * ui: fix unchecking 'Filter VMID' * ui: VM: guest agent IP View: also filter out 0:0:0:0:0:0 * vzdump: allow prune-backups as an alternative to maxfiles * fix #3049: ui: Firewall Rules: wider rule number column * fix #3010, #3011: ui: VM options: re-do boot order editor, making it much more flexible and powerful * backup: include IDs for non-existent guests and error again if they are left over configured in a job * partially fix #3056: namespace vzdump temporary directory with VMID * ceph: allow to alter settings of an exisiting pool, only over API/CLI for now * ceph: add option to control placement-group autoscale mode on pool create * ui: ceph: allow one to specify the device class on OSD create as advanced option * fix #2827: ui: add "verify SSL certificated" checkbox for LDAP realms -- Proxmox Support Team Thu, 22 Oct 2020 18:50:07 +0200 pve-manager (6.2-12) pve; urgency=medium * fix #2890: also detect & renew DNS-only ACME certs * fix #2908: fixed password validator for adding PBS as storage * vzdump: use configured tmpdir for PBS * fix #2913: order backup jobs numerically by VMID * fix #2842: ui: filter on exact vmid * api: ACME renew: handle error from revoking old cert gracefully * api: ACME revoke: do not abort if CA is just expired * replication: improve various checks and fallback/default settings * pveversion: track proxmox-backup-client * ui: block removal of in-use container image * ui: dc/Backup: disable pveCompressionSelector for pbs storages * lxc: increase max cores from 128 to 8192 * lxc: increase max number of net interfaces from 10 to 32 -- Proxmox Support Team Mon, 21 Sep 2020 11:28:07 +0200 pve-manager (6.2-11) pve; urgency=medium * ui: add ceph recovery graph and progressbar * pveceph: allow setting device class on osd create * api/services: improve essential service check, allow reload and start * ui: storage: Proxmox Backup: allow one to setting up and deleting an encryption key. For now only autogeneration over UI. Use pvesm if you want to use a pre-existing key file. -- Proxmox Support Team Fri, 24 Jul 2020 19:19:19 +0200 pve-manager (6.2-10) pve; urgency=medium * vzdump-hook-script: rename TARFILE to TARGET and add fallback to TARFILE for compatibility reasons -- Proxmox Support Team Tue, 14 Jul 2020 10:28:42 +0200 pve-manager (6.2-9) pve; urgency=medium * fix #2609: ui: backup: add info and status view for guests without any backup job * ui: dc/backup: add new backup job detail view * Revert "Close #1623: replace apt-get to apt", avoid possible breakage due to not having a stable CLI interface yet. -- Proxmox Support Team Thu, 09 Jul 2020 20:12:13 +0200 pve-manager (6.2-8) pve; urgency=medium * fix #1623: replace apt-get with apt * ui: sdn: add simple zone plugin * ui: sdn: move mtu from vnetview to zoneview * ui: add PBS edit input panel -- Proxmox Support Team Tue, 07 Jul 2020 19:16:36 +0200 pve-manager (6.2-7) pve; urgency=medium * ui: migration dialog: Allow setting no target storage to reuse current, and make that default * api: cluster resources: add sdn audit permission * dc/Tasks: pass endtime to make duration calculation correct * fix #2802: metric flush check should not care about current usage * fix #2771: relax cert API endpoints permissions * fix #2784: always compare ACME domains in lower case * api: register /nodes/X/cpu call for CPU models * ui: improve ProcessorEdit and load models dynamically * fix #2810: fix setting Container mounts for multiple guests in a browser session * node_config: Allow leading underscore in ACME aliases * change permissions for non-network cloudinit settings * ui: cifs: reset proxy cache also if user or password change and make user and password fields independent from each other * ui: ceph: downgrade remapped from error to warning/working * vzdump: set target for PBS based backups to show in the vzdump mail log overview -- Proxmox Support Team Mon, 06 Jul 2020 22:11:08 +0200 pve-manager (6.2-6) pve; urgency=medium * api: improve node index with missing/broken cert * sdn: add VLAN-aware option to VNet edit dialog * sdn: add mtu field to VLAN edit dialog * initial support for upgrading to ceph octopus * show if a ceph pool is using the PG autoscaler * ui: improve filtering by VMID and search for the backup list view -- Proxmox Support Team Wed, 03 Jun 2020 16:37:56 +0200 pve-manager (6.2-5) pve; urgency=medium * improve ACME interaces * fix #2747: ui: API token create: always reset base submit URL * sdn: restrict zone and vnet name to 8 characters * fix #2574: ui: permission-path selector: push each unique permission object path only once * fix #2718: ui: qemu: handle localtime option correctly, allow all tree states * api, ui: allow to remove subscription key -- Proxmox Support Team Wed, 27 May 2020 14:31:00 +0200 pve-manager (6.2-4) pve; urgency=medium * add online help references to new experimental Software Defined Network web interface, it is now also included in the documentation. * api: apt/versions: track the version of the optional 'libpve-network-perl' package -- Proxmox Support Team Sun, 10 May 2020 21:06:56 +0200 pve-manager (6.2-3) pve; urgency=medium * ui: dc authentication: improve adding ad new LDAP based realm * ui: cluster join: hide all fields in assisted mode until we got some info * external metric server: improve flush on big data updates * update shipped aplliance index info -- Proxmox Support Team Sat, 09 May 2020 19:32:52 +0200 pve-manager (6.2-2) pve; urgency=medium * fix #2708: ui: increase default memory in VM create wizard to 2GiB * improve ACME and certificate related user interface -- Proxmox Support Team Thu, 07 May 2020 21:49:10 +0200 pve-manager (6.2-1) pve; urgency=medium * ui: support up to 8 corosync/kronosnet links on cluster create or join * initial gui-integration of DNS based ACME (Let's Encrypt) certificate configuration and management * fix #1210: ceph: extend pveceph purge * ui: switch backup default compression selection to ZSTD -- Proxmox Support Team Wed, 06 May 2020 20:17:51 +0200 pve-manager (6.1-11) pve; urgency=medium * Fix #2124: Add support for zstd -- Proxmox Support Team Mon, 4 May 2020 14:11:21 +0200 pve-manager (6.1-10) pve; urgency=medium * acme: use new proxmox-acme-perl * acme: allow configuring DNS plugin options in nodeconfig -- Proxmox Support Team Sat, 02 May 2020 18:33:27 +0200 pve-manager (6.1-9) pve; urgency=medium * fix #2634: print specific error if hook-script is not executable * API: allow one to OVS network live reloading * add experimental SDN gui * ui: ceph: add icons for versions in MON/MGR/MDS ServiceList panels * ui: ceph: add highest cluster version in summary * ui: add API token management interfaces * ui: add user and API token "effective-permission" explorer * ui: add Language selection in user menu * ui: datacenter/Authentication: allow one to sync LDAP and AD realms * certs: early renew long-lived certificates to cope with clients which do not accept certificates with a lifetime of more than two years * ui: don't block offline migration due non-referenced disk in the config -- Proxmox Support Team Wed, 29 Apr 2020 17:15:38 +0200 pve-manager (6.1-8) pve; urgency=medium * ui CT Features: add checkbox for new allow unproblematic mknod device creation in CT feature. * ui: do not suggest that it's allow to edit 'special' permission roles * ui: snapshots: hide 'Include RAM' when VM isn't running * ui: TFAEdit: use viemodel binding for hiding/showing qr code * ui: dc/Summary: improve dashboard storage calculation * ui/cluster: show all corosync/knet links (up to 8) in cluster overview * gui: pci passthrough: fix 'Add PCI' dialog for new devices * vzdump: add support for proxmox backup server * storage content GUI: improve detection of backup volumes * pvesh: Add all standard output options that are not yet defined * ceph: do not check IPs if no explicit puvlic/cluster networks got set in the ceph configuration * ui: qemu: allow one to add a virtio-rng device * ui: ContentView: consider new ctime value * fix #2611: gui: use backendUnit and pretty renderer * ui: dc/options: add max_workers setting * ui: make grid column filter more obvious -- Proxmox Support Team Mon, 09 Mar 2020 19:05:11 +0100 pve-manager (6.1-7) pve; urgency=medium * ui: show cluster name from joinInfo in join dialog * fix #2572: gui: make snapshot panel visible for VM.Audit * ui: fix disk controllers sortByPreviousUsage iteration when re-attaching a disk -- Proxmox Support Team Thu, 30 Jan 2020 20:31:58 +0100 pve-manager (6.1-6) pve; urgency=medium * ui: reload embedded xterm.js console if CT starts during viewing it * fix #2334: gui/cloudinit: enable edit button only when editor is set * ifupdown1: bridgevlan: add bridge-vids list support * api2: network: add bond-primary, MTU, vlan-raw-device and vlan-id options * fix #2552: ui: allow one to collapse notes panel from guest summary * pvestatd: broadcast supported node CPU flags * www: add 'users' columns to Groups model * integrate authentication with API tokens * implement 'allowtoken' property for REST API endpoint schema * ui: add permissions button to userview -- Proxmox Support Team Wed, 29 Jan 2020 21:28:52 +0100 pve-manager (6.1-5) pve; urgency=medium * ui: make storage where VM-state is saved configurable * ui: vm/HDEdit: fix backup checkbox default * ui: fix Bandwidth-Selector component for empty return values * fix #2509: add --rsyncable to backups using pigz again * fix #2496: api: create OSD: check if ceph cluster network is configured -- Proxmox Support Team Mon, 16 Dec 2019 15:12:19 +0100 pve-manager (6.1-4) pve; urgency=medium * ui: add date column for backups in storage content view * ui: backup restore: add start-after-restore checkbox * bulk migration: only pass 'with-local-disks' along if defined, to avoid warnings * ceph: Create symlink on standalone MGR creation * ui: improve choosing column per-row-count based on width in DC Node, VM, CT summary panels * ui: local browser settings: let users overwrite the number of columns in summary panels * ui: Mountpoint Edit/Create: default to true for "backup inclusion" on MP creation -- Proxmox Support Team Mon, 09 Dec 2019 15:33:12 +0100 pve-manager (6.1-3) pve; urgency=medium * api: apt/versions: improve stabillity under edge cases * improve pveversion for removed but not yet purged packages * fix #2487: ui: HA: show VM/CT name column in resource overview -- Proxmox Support Team Tue, 03 Dec 2019 14:34:26 +0100 pve-manager (6.1-2) pve; urgency=medium * ui: dc/options: add onlineHelp to u2f and ha edit window * LXC: Disable resize button when volume is unusued * ui: dc/options: fix capabillities for u2f, bwlimits, ha settings * api: apt/versions: track ifupdown and ifupdown2 as optional package * api: add migrate precondition checks to bulk migrate api * ui: add checkbox to bulk migrate window to allow migration with local disks * ui; qemu/HardwareView: show vmstate and allow removal -- Proxmox Support Team Sat, 30 Nov 2019 18:41:21 +0100 pve-manager (6.1-1) pve; urgency=medium * fix #2462: ACMEAccount: make tos in get_tos optional * ui: lxc: switch reboot and stop button to match the interface of VMs * ui: allow to set 'migrate' HA shutdown policy in datacenter options * ui: node network: enable apply config button * api: network reload: more granular "is OVS used" check * automatically renew pve-ssl.pem when it nearly expires * api: ceph monitor: allow full-mesh routed setup for monitor IP * ui: dc/options: allow one to setup U2F AppID and origin * lxc: disable remove button for pending resource changes * adaptions for the experimental SDN package * ui: dc/options: add clusterwide IO bandwidth limit editor -- Proxmox Support Team Wed, 27 Nov 2019 11:35:57 +0100 pve-manager (6.0-15) pve; urgency=medium * api/ceph: skip merging metadata if hostname is undefined * Fix #2476: Fix auto-ballooning QMP command -- Proxmox Support Team Thu, 21 Nov 2019 15:16:27 +0100 pve-manager (6.0-14) pve; urgency=medium * add reboot button for container * improve pvestatd memory usage when a Graphite External Metric status plugin is enabled * fix #352: Limit the length of backup logs for mails * fix #2436: ui: pci passthrough: consider domain in PCISelector * fix #844: allow to set an initial delay for the start-all-marked guests on boot command, in the per-node config. * api: node/config: allow to return only a specific config property * VM guest agent: allow to set QGA socket type also to ISA for guest operating systems not supporting VirtIO serial sockets -- Proxmox Support Team Wed, 20 Nov 2019 20:45:36 +0100 pve-manager (6.0-13) pve; urgency=medium * takeover CertCache from pve-cluster * use PVE::DataCenterConfig * use PVE::RRD for RRD data * pveproxy.service: take over pvecm call from pve-cluster.service * update (build-)dependencies after pve-cluster refactor -- Proxmox Support Team Mon, 18 Nov 2019 12:22:30 +0100 pve-manager (6.0-12) pve; urgency=medium * pveversion: track libspice-server1 version again * ui: fix backup "Run now" with specific node selected * add initial graphite TCP support * gui: lxc/Resources: improve reload behaviour * ui: vm opts: add hint for spice foldersharing * api: ceph version: actually get full version * api: ceph/metadata: add structured node versions information -- Proxmox Support Team Fri, 15 Nov 2019 19:04:46 +0100 pve-manager (6.0-11) pve; urgency=medium * fix #1291: add purge checkbox to VM/CT destroy dialog * ui: TFA: default to a 160 bit secret * ensure alias.db is available and up-to-date if upgrading from older versions * ui: qemu: update grid button status with events from correct store * ui: Container: add revert button for pending changes -- Proxmox Support Team Wed, 30 Oct 2019 18:02:40 +0100 pve-manager (6.0-10) pve; urgency=medium * api: subscription: use rpcenv for permission check * updated shipped aplinfo index * vzdump: move code needed for cfs register of vzdump.cron to guest-common * fix #2364: allow offline migration with local cloudinit disk * webinterface: show and allow one to edit pending container changes -- Proxmox Support Team Fri, 18 Oct 2019 22:29:22 +0200 pve-manager (6.0-9) pve; urgency=medium * webinterface: vm-options: add spice enhancements * webinterface: vm opts: clarify QEMU Guest Agent option * webinterface: qemu: allow move disk for EFI Disk again * webinterface: vm migrate: add checkbox to enable offline migration with local resources * aplinfo: update trusted keys to include all currently trusted ones. -- Proxmox Support Team Wed, 16 Oct 2019 08:25:44 +0200 pve-manager (6.0-8) pve; urgency=medium * fix #2262: allow one to set noVNC default scale in setting * improve layout of browser local user settings * api network: improve experimental SDN network support * ui: fix small login window issue on chrome * update shipped appliance info index * gui: qemu: add reboot button which powercycles a VM and applies any outstanding pending changes in-between * gui: usb: Enable USB3 for Spice USB passthrough * gui: improve USB pass through selector, allow to search by product * ui: cpumodel: add Skylake-Server, Cascadelake-Server, KnightsMill * mobile gui: implement login for OTP based TFA enabled user accounts * gui: Make CPU Model Selector a searchable grid view * fix #2389: ceph wizard showing network of target node -- Proxmox Support Team Fri, 04 Oct 2019 16:41:47 +0200 pve-manager (6.0-7) pve; urgency=medium * ui: vm memory: correctly set initial maxValue for balloon * fix #2340: gui: ceph: handle 'null' versions for hosts * fix #2341: ceph: osd create: allow db/wal on partioned disks * ui: allow one to add the AES flag explicitly to VMs * ui: IPRef field: allow all valid IPs, even if not in the store * ui: show supported file types in upload file selector * api: add initial (experimental!) Software Defined Networ (SDN) API integration if the libpve-network-perl is installed -- Proxmox Support Team Tue, 03 Sep 2019 10:31:21 +0200 pve-manager (6.0-6) pve; urgency=medium * ui: vm/Hardware: convert more icons from bitmap to vectorized font awesome * ui: login: do not show connection failure as login failure * fix #582: Cope with long running deletions of backup and disk images by forking a task worker into the background after some delay * fix #2314: remove GZIP env var * fix #1594: add "Run now" button for cluster wide backup jobs * backup: delete "exclude" VMID list when switching a backup job to pool mode -- Proxmox Support Team Fri, 16 Aug 2019 13:09:50 +0200 pve-manager (6.0-5) pve; urgency=medium * fix #2292: ceph osd create: use size parameter for db/wal * improve ceph error handling * aplinfo: update from aplinfo-pve-6.dat * gui: improve service and package version hints in ceph OSD and dashboard view. * fix #2265: enable discard for virtio-blk * pve5to6: cert: check certificates key size * ceph: add new OSD flag API endpoints in node-agnostic /cluster/ceph path * gui: ceph: Allow to set much more flags than 'noout' through the Web GUI with a new flag management window * ui: add VM 'hv-tlbflush' and 'hv-evmcs' CPU flag as new optional flags, for those where they do not generate problems. * ui: Include Windows Server 2019 in OS-Type list * allow to add a SPICE audio devices to a VM -- Proxmox Support Team Tue, 23 Jul 2019 19:21:08 +0200 pve-manager (6.0-4) pve; urgency=medium * ui: fix wrong defaultConsole fallback in tree * ui: dc/Cluster: rename ring columns to link * ui: cephfs: also add new tooltip like pool create * ceph: mon list: show only as running when monitor is quorate * pve5to6: do not complain about native newly created Nautilus OSDs -- Proxmox Support Team Mon, 15 Jul 2019 18:37:12 +0200 pve-manager (6.0-3) pve; urgency=medium * pveam available: add 'mail' to sections * ui: node/disks: fine tune column width and hide vendor by default * ui: container: filter unusable lxc mount options for the special rootfs mountpoint -- Proxmox Support Team Fri, 12 Jul 2019 12:30:58 +0200 pve-manager (6.0-2) pve; urgency=medium * ceph: add api call for getting the ceph config database * gui: ceph: show config database under the file config * fix #1451: allow some extra mount options for container * further improve 5to6 checklist script * fix #2267: delete address(6) and netmas(6) with cidr(6)~ * gui: show a 0 value for HA resource grid max_relocate/restart columns correctly * pveproxy: allow to request debug sources directly over GET parameter * ui: dc/options: use proxmoxNetworkSelector for network * ui/Parser: printPropertyString: sort non-defaultKey parts for stability * api/ceph: add osd scrub api call * gui: ceph osd: refactor osd panel and add scrub button~ * ui: ceph OSD: tweak default column width a bit~ * ui: ceph/osd: only show at max 5 digits after decimal point for weight * ui: ceph/osd: merge apply + commit latency columns~ * ui: remove notify calls on viewmodel * ui: ceph/pool: rework status grid a bit * ui: ceph/service list: re-do column definitions with flexible widths * ui: ceph/pool: enable add_storages by default and add tooltip~ * ui: dc/cluster: allow to create cluster with second link -- Proxmox Support Team Thu, 11 Jul 2019 20:41:51 +0200 pve-manager (6.0-1) pve; urgency=medium * gui: ceph pools: fix pool percentage used display * further improve pve5to6 upgrade checklist helper * gui: ceph: fix syslog resize * ceph: osd: use get-or-create to create a bootstrap-osd key on demand * ceph: init: only handle keyring if auth is cephx * ceph: mon create: add known monitor ips to mon_host if it is empty * ceph: automatically create manager after the first monitor * pveceph install: set repo URL to download.proxmox.com nautilus repo * ceph: do not distribute obsolete ceph.service anymore -- Proxmox Support Team Thu, 04 Jul 2019 15:53:18 +0200 pve-manager (6.0-0+4) pve; urgency=medium * ui: switch over default console viewer to xterm.js * improve pve5to6 upgrade checklist helper * ui: use new network selector for cluster create and join * remove pve-apt.conf which ensured pve-kernels did not get autoremoved, replaced by a smarter version provided by proxmox-ve * fix #1278: add possibility to backup pools over API and Web UI * ceph: mon create: fix not starting monitor if no public_addr is in conf * eph: disallow IPv4 in new clusters when IPv6 is enabled -- Proxmox Support Team Fri, 28 Jun 2019 20:26:53 +0200 pve-manager (6.0-0+3) pve; urgency=medium * VM migrate: add migration with local disks over web GUI * VM migrate: do some initial checks before a migrate is triggered to notify users about problems earlier * ceph: init: update inital config for nautilus * ceph: improve monitor creation and adapt for Nautilus * ceph: mon create: detect pubnet via config database * ceph: enable also msgr2 format for monitors * gui: ostypes: include 5.x in Linux series and reword to range * gui: add warnings for ceph and zfs for disks backed by hardware raid controller * gui: workspace: cope better with upgrade related false positive 401 HTTP codes * backup jobs: acquire lock before modifying vzdump.cron -- Proxmox Support Team Tue, 25 Jun 2019 12:37:44 +0200 pve-manager (6.0-0+2) pve; urgency=medium * api: cluster/resources: add information about guest locks * gui: tree: add lock information to tree entries and its tooltips * api network: make IPv6 address checking spew out more useful errors * gui: ceph install wizard: use new network selector widget for monitor creation * fix #2190: Base64 encode SMBIOS value strings in order to allow more characters * ceph: allow to enable encryption on osd create through web GUI or API * gui: vm: add new CPU flag selector with tri-state awareness and many more flags to select * improve OSD creation compatibility with Ceph Nautilus * gui: add initial version of cluster wide ceph dashboard * allow to destroy OSDs under both, Ceph Luminous and Nautilus * ui: show ceph monitor, manager & OSD versions from pveceph managed cluster and warn if they are not all the same * fix #2223: fix set_button_status isCDRom -- Proxmox Support Team Fri, 14 Jun 2019 21:16:41 +0200 pve-manager (6.0-0+1) pve; urgency=medium * rework log out button to general user and session management menu * re-build for Debian Buster / PVE 6 -- Proxmox Support Team Wed, 22 May 2019 21:30:56 +0200 pve-manager (5.4-6) unstable; urgency=medium * gui: node: change syslog to JournalView and new (mini-)journal api * node: add api endpoint for new mini-journalreader * fix #2197: ui: editing CDROM doesn't require VM.Config.Disk rights * ui: NodeSelector: check status field for offline nodes * allow to use cidr(6) for passing IP/CIDR to the network api * fix #2183: fix blinking subscription and show unknown status * ui: TFAEdit: use new tfa api call * ui: storage: handle empty response in case of file upload error -- Proxmox Support Team Wed, 15 May 2019 16:18:40 +0200 pve-manager (5.4-5) unstable; urgency=medium * ui: two factor auth: handle older TFA setups with no specific type set * fix #1910: urlencode usernames in UserEdit * ensure we have up-to-date information before retrieving cluster status * fix #482: Add timestamps to backup create task log -- Proxmox Support Team Wed, 24 Apr 2019 11:28:11 +0000 pve-manager (5.4-4) unstable; urgency=medium * fix #1326: allow multiple status server definitions per type * fix ceph install wizard not accepting ipv6 * ui: tfa: set initial tab based on current tfa type and disable other tabs * fix #2177: use getValue() to get otp value * fix #263: only include node rrd stats if user has Sys.Audit -- Proxmox Support Team Tue, 16 Apr 2019 14:22:47 +0000 pve-manager (5.4-3) unstable; urgency=medium * use correct icon for hibernate in tree context command menu * ui: Restore: Fix error where the textfield did not default to next free VMID * fix #1814: do not enable disk related buttons for audit user * ui: dc/options: allow to edit migration settings and HA shutdown policy -- Proxmox Support Team Wed, 10 Apr 2019 16:11:05 +0200 pve-manager (5.4-2) unstable; urgency=medium * improve user TFA editing * all TFA logins are now provided as two steps in the WebUI, first common login credentials then, if configured, TFA. The OTP field from the login window got removed, it is not necessary anymore. * update shipped aplinfo index * pvereport: only compute report def if we generate a report * add onlineHelp for new WebUI windows and panels -- Proxmox Support Team Mon, 08 Apr 2019 17:42:20 +0200 pve-manager (5.4-1) unstable; urgency=medium * fix #1145: Warn if datacenter firewall is disabled * add host firewall config, ip route information, ceph, iSCSI and more disk and ZFS information to pvereport * fix #2132: gui: set vcpu default maxValue to 1 * pvestatd: preparation to rotate auth keys if necessary * fix: # 2123 Logging of user defined firewall rules * ui: show lock in status bar of vms/cts * allow deletion of mac prefix * use localhost instead of 127.0.0.1 to listen with spiceterm * add tooltips to the tree * ui: improve ceph installer * ui: move VM BIOS and SCSI controller selection to hardware tab * ui: allow to set VM machine type through hardware tab * ui: VM command menu: rename suspend to pause * ui: allow to hibernate (suspend to disk) VMs * ui: allow to set the firewall log rate limit and burst * fix: #1145 enable CT/VM NIC firewall by default on creation via WebUI, so that only the one from the VM/CT options must be enabled * ui: support user-settable u2f and TOTP authentication and configuration * ui: always show otp field on login * fix: #1218 Expose unique MAC address generation on restore of VMs and CTs in UI -- Proxmox Support Team Thu, 04 Apr 2019 14:03:41 +0200 pve-manager (5.3-12) unstable; urgency=medium * ui: fix popup behaviour in firefox with touchscreens on desktop * pveproxy: allow one to set 'honor_cipher_order' and 'no compression' * add possibility to call pveceph install through shell API * fix #2122: use correct format in help text of timefield * added basic ability to install ceph via web gui -- Proxmox Support Team Tue, 12 Mar 2019 12:37:42 +0100 pve-manager (5.3-11) unstable; urgency=medium * fix #2108: ceph: 'osd pools set' cannot accept integers anymore, thus ceph pool creation failed in some cases, e.g., CephFS creation over GUI, API or CLI and pool creation over CLI or API depending on parameters passed. -- Proxmox Support Team Wed, 20 Feb 2019 19:40:43 +0100 pve-manager (5.3-10) unstable; urgency=medium * show Storage Content with Datastore.AllocateSpace/Audit permissions * fix #2051: preserve DB/WAL disk on destroy * fix #2096: enable resume in context menu for guest triggered sleep * default to unpriviledged CT in the GUI * fix #1769: restart mode for bulk lxc migration * pveproxy: add configurable HONOR_CIPHER_ORDER and COMPRESSION settings -- Proxmox Support Team Wed, 20 Feb 2019 12:27:12 +0100 pve-manager (5.3-9) unstable; urgency=medium * fix #1982: pvesh: check if a handler exists for path * fix #1752: implement wake on LAN functionality for nodes in CLI, API and GUI * fix #2058: show correct pool for external ceph clusters * task index: allow filtering by task type and selection of task source(s) * add virtio-gpu and none to VMs display selection combobox * add context menu to global search bar entries * show hookscripts in GUI * fix #1831: Add filter to CT template/appliances download window -- Proxmox Support Team Fri, 01 Feb 2019 13:35:05 +0100 pve-manager (5.3-8) unstable; urgency=medium * fix #1997: set taskid for single-guest backups * fix #2030: use looks_like_number for number check * ceph: change check if installed to ceph mon binary * allow 8-way NUMA systems -- Proxmox Support Team Fri, 11 Jan 2019 10:23:42 +0100 pve-manager (5.3-7) unstable; urgency=medium * refactor ceph API and modules -- Proxmox Support Team Thu, 20 Dec 2018 10:59:14 +0100 pve-manager (5.3-6) unstable; urgency=medium * fix #2017: add help button to storage input panels * Fix #2019: CephFS storage misses Max Backups * ui: lxc/features: add fuse * ui: lxc/features: disable nfs and cifs for unprivileged * do not send 'undefined' as romfile when adding a pcidevice -- Proxmox Support Team Fri, 14 Dec 2018 12:25:17 +0100 pve-manager (5.3-5) unstable; urgency=medium * ui: CephFS: fix onlineHelp buttons -- Proxmox Support Team Mon, 03 Dec 2018 12:13:25 +0100 pve-manager (5.3-4) unstable; urgency=medium * pveceph: ensure ceph-fuse gets uptdated when installing ceph server * api: poll for for active MDS on CephFS creation * fix #1430: ceph init: allow to specify separate cluster network * pveceph: create OSD: wipe disk after initial 'free-to-use' checks to ensure creating succeeds even if the disk was an OSD earlier * ui: cluster: require ring0_addr if joinee's ring and node addr differ * ceph: update all placement groups (pg_num) defaults to 128 -- Proxmox Support Team Thu, 29 Nov 2018 12:49:30 +0100 pve-manager (5.3-3) unstable; urgency=medium * api: cephfs create: wait for MDS to become active before adding as storage * api: cephfs: check if storage ID is free when add_storage is set -- Proxmox Support Team Fri, 23 Nov 2018 19:15:52 +0100 pve-manager (5.3-2) unstable; urgency=medium * include ceph-mds in pveceph install -- Proxmox Support Team Fri, 23 Nov 2018 16:17:22 +0100 pve-manager (5.3-1) unstable; urgency=medium * ceph: add service restart api call * gui: add ceph osd and monitor restart button * gui: add CephFS integration * add CephFS and MDS API integration -- Proxmox Support Team Fri, 23 Nov 2018 14:07:50 +0100 pve-manager (5.2-13) unstable; urgency=medium * allow one to remove images from a storage over the web GUI, if no VM exists in the cluster or the storage is local * allow one to passthrough PCI devices to VMs over the web GUI -- Proxmox Support Team Thu, 22 Nov 2018 14:55:57 +0100 pve-manager (5.2-12) unstable; urgency=medium * improve ZFS gui * fix #1959: remove invalid SLAAC option * pveceph: pool create: add_storage now only creates one storage entry * Enable "Discard" option for IDE and SATA drives * fix #1928: ct snapshot: changed rollback message to warning * fix #1358: ui: show clustername besides Datacenter node, if available * fix #1224: ui: ACLAdd: allow one to filter by username * ui: dc/storage: allow one to add CephFS entries -- Proxmox Support Team Mon, 19 Nov 2018 15:25:58 +0100 pve-manager (5.2-11) unstable; urgency=medium * Update default CIPHERS to a more current list * close #584: ui qemu: changed remove unused disk to asynchron call * dc/user: render user fullnames htmlEncoded * ceph: osd: wipe start of blockdevice when destroying ceph disk to ensure it can be re-used for any purpose * gui: expose lxc features * Add "SSD emulation" property to IDE, SATA, and SCSI drives * fix sorting for unused disks/mounpoints in the VM/CT Hardware/Resource view * gui: let users edit the vga memory * node zfs: added check for undefined & new case AVAIL -- Proxmox Support Team Fri, 09 Nov 2018 17:00:03 +0100 pve-manager (5.2-10) unstable; urgency=medium * add /node/{NODE}/hosts API Call * make /etc/hosts editable via gui * API2 : Network : add network config reload * pvesh: fix bug #1942 - add standard options conditional -- Proxmox Support Team Tue, 16 Oct 2018 11:55:15 +0200 pve-manager (5.2-9) unstable; urgency=medium * gui: allow whitespace in mountpoint paths * fix #1884: vm/hardware: ensure correct value on pending changes * pveceph: remove btrfs as fstype for new OSDs * qemu: CPU selector: add EPYC * fix #1897: bump max number of mountpoints to 256 * fix checkbox selection for guest selector used by bulk actions -- Proxmox Support Team Thu, 13 Sep 2018 11:42:38 +0200 pve-manager (5.2-8) unstable; urgency=medium * fix doubleclick on VM with spice console * ui: storage: combine RBD external and hyperconverged add dialog * add LVM, LVMThin, directory based storage and ZFS management GUI * ui: storage: Linux LIO/targetcli support * fix #1837: reorganize HA panel * fix #1828: check if targetnode exists before starting mass migration * ui: ZFS over iSCSI: allow only relevant inputs * fix #1393: use language from datacenter.cfg as default for GUI * fix #1872: always close VM disk move panel after its taskviewer got closed -- Proxmox Support Team Mon, 20 Aug 2018 15:11:06 +0200 pve-manager (5.2-7) unstable; urgency=medium * pveproxy: add link to extjs for api-viewer * pvesh: complete rewrite (removed interactive mode) * pvenode: use print_api_result to print acme account information * ui: permissions: allow to select root path '/' directly * set resize to 'off' for the novnc popup * improve xtermjs settings button behaviour * nodeconfig acme-domain: allow domains starting with numbers * Submit pool if non-empty in lxc CreateWizard -- Proxmox Support Team Fri, 27 Jul 2018 11:47:05 +0200 pve-manager (5.2-6) unstable; urgency=medium * add task list, log and status commands to the pvenode cli tool * ui/storage: cifs: only allow entering a password if user is set * Add cephfs to allowed storages for vzdump backup * document return properties for cluster resource and node list API calls -- Proxmox Support Team Tue, 10 Jul 2018 14:46:32 +0200 pve-manager (5.2-5) unstable; urgency=medium * add startall, stopall and migrateall commands to the pvenode cli tool * replace read_password with param_mapping in pvesh -- Proxmox Support Team Wed, 27 Jun 2018 14:01:43 +0200 pve-manager (5.2-4) unstable; urgency=medium * add create wizard checkbox to autostart a container after creation finished successfully * add compatibility with ACMEv2 protocol for node certificates -- Proxmox Support Team Wed, 27 Jun 2018 09:04:06 +0200 pve-manager (5.2-3) unstable; urgency=medium * allow ifupdown2 as alternative for ifenslave * add autostart checkbox when creating a VM * remove limits from swap/memory input boxes * add ebtables option to cluster firewall settings -- Proxmox Support Team Fri, 15 Jun 2018 12:28:17 +0200 pve-manager (5.2-2) unstable; urgency=medium * fix #1499 Implement a combobox for Permissions paths * fix #427: add notes panel to node * api/acme: actually fallback to default value for account name parameter * Improve VM AgentIPView WebUI component * allow adding socket backed serial devices to VMs in WebUI * allow one to re-enable iSCSI storages again through WebUI -- Proxmox Support Team Tue, 05 Jun 2018 15:18:13 +0200 pve-manager (5.2-1) unstable; urgency=medium * add _blank target for optional url * fixes #1503 Add role CRUD to the GUI. * hide irrelevant buttons and tabs for container templates * ui/UserEdit: fixup grammar in password match error message * update included aplinfo.dat * correct node free calculation * add missing onlineHelp links -- Proxmox Support Team Mon, 14 May 2018 14:04:15 +0200 pve-manager (5.1-53) unstable; urgency=medium * show additional status info in the VM summary page * added an io-error status icon for VMs * minor keyboard interaction improvements in the UI * added a node-specific configuration file * added ACME API endpoints to manage ACME accounts and certificates * added pvenode command line tool for certificate and acme account management * added certificate renewal to pveupdate * added certificate management to node UI * expose 'move volume' functionality for container mount points via the UI -- Proxmox Support Team Mon, 07 May 2018 15:13:02 +0200 pve-manager (5.1-52) unstable; urgency=medium * VM/Hardware: show memory shares * remove the novnc panels for node/container (replaced by xtermjs) * allow xtermjs to be the default console * fix #1691: use asynchronous API call for VM disk creation * fix #1732: actually post values in IScsiEdit -- Proxmox Support Team Mon, 23 Apr 2018 15:40:48 +0200 pve-manager (5.1-51) unstable; urgency=medium * overwrite the built-in 'run_editor' function -- Proxmox Support Team Fri, 06 Apr 2018 14:09:51 +0200 pve-manager (5.1-50) unstable; urgency=medium * better focus of lxc/MPEdit * merge cores, cpulimit and cpuunits for containers * lxc/MPEdit: rework for advanced options * Utils: add forEachMP * lxc/ResoureEdit: move some cpu fields to advanced options * qemu/CreateWizard: add advanced options on general tab * qemu/NetworkEdit: rework panel for advanced options * qemu/MemoryEdit: rework panel and move most things in advanced options * qemu/HDEdit: move diskthrottling to advanced options * fix editor and set_button_status for cloudinit * rework ProcessorEdit and merge with CPUOptions using advanced options * qemu/HDEdit.js: move some fields into advanced options * add advanced checkbox to the wizard * Add CIFS in strorage info to allow backup. -- Proxmox Support Team Fri, 06 Apr 2018 13:55:38 +0200 pve-manager (5.1-49) unstable; urgency=medium * add cluster administartion panel * ui: add storage plugin base class * controller: StorageEdit: check if 'maxfiles' could be looked up * ui/Utils: add storage schema * ui/Utils: do not create non-standard console.dir fallback * ui: restore: add bandwidth limit field * ui: dc/storages: add bwlimit column * ui: dc/storages: use responsive column width * pve-daily-update.service: add Wants/After for pve-cluster.service -- Proxmox Support Team Thu, 05 Apr 2018 12:30:58 +0200 pve-manager (5.1-48) unstable; urgency=medium * improve and add additional information in pvereport * add clone UI for container * add CIFS (SMB) UI * add cloundinit UI * pveupdate: replace cron job with systemd timer (pve-daily-update) * fix #1698: add_integer_row should add an integer row * cleanup build and packaging system * VZDump: handle timelocal year correctly * fix #1683: do not send non-numeric values to graphite -- Proxmox Support Team Thu, 22 Mar 2018 09:36:11 +0100 pve-manager (5.1-47) stable; urgency=medium * added icons to summaries and improved spacing * added HA info to the template summary * show IP address in summary if the guest-agent can provide it * let storage summary, ceph & cluster dashboards use the full browser width * various node, lxc and qemu summary page improvements * preparations for extjs 6.2.0 * update widget toolkit dependency -- Proxmox Support Team Mon, 26 Feb 2018 10:26:44 +0100 pve-manager (5.1-46) stable; urgency=medium * pveversion: sort kernel packages by version * pveversion: add new pve packages * fix wizard validity check for options spanning multiple tabs * fix #1573: show bootdisk usage on container summary * fix edit button for some panels * fix #1629: improve min/max memory handling * fix #1631: change units to binary prefix * fix #1635: correctly change maxIds in ControllerSelector in wizard * enable/disable xtermjs depending on the existance of a serial port * show serial ports on the gui * change group of unused to 99 to that we can add things in between * add icon/class for serial ports * qemu/Monitor: save the last 20 commands -- Proxmox Support Team Fri, 16 Feb 2018 15:07:52 +0100 pve-manager (5.1-44) stable; urgency=medium * fix upgrade of other cluster nodes via xtermjs not working properly * switch to using pve-i18n and proxmox-widget-toolkit -- Proxmox Support Team Thu, 25 Jan 2018 13:57:12 +0100 pve-manager (5.1-43) stable; urgency=medium * add spec-ctrl cpu flag checkbox * add defaultSize parameter for DiskStorageSelector and set it to 8 for lxc -- Proxmox Support Team Wed, 17 Jan 2018 09:06:28 +0100 pve-manager (5.1-42) stable; urgency=medium * fix #1605: reflect backend values of minimum container memory limit * add a 'pcid' checkbox to the CPU edit window -- Proxmox Support Team Wed, 10 Jan 2018 11:53:33 +0100 pve-manager (5.1-41) stable; urgency=medium * pveupdate - always run check for available updates * prevent double ticket api call * Add new icon for xtermjs consoles, based on xtermjs logo -- Proxmox Support Team Thu, 21 Dec 2017 12:47:40 +0100 pve-manager (5.1-40) stable; urgency=medium * send an email when a replication job fails * added xterm.js as an alternative for vncterm for the host shell, container terminals and qemu serial port connections * allow users with the Sys.Audit permission to see the subscription status * allow users with the Sys.Modify permission to see and modify subscriptions -- Proxmox Support Team Wed, 13 Dec 2017 11:59:01 +0100 pve-manager (5.1-39) stable; urgency=medium * fix #1589: auth_handler: raise proper exception on init_request error (e.g., during pmxcfs restarts) * update catalan translation * add a proper confirmation message when we detach an used disk * fix #1526: Use 'detach' instead of 'remove' when the disk is used -- Proxmox Support Team Mon, 11 Dec 2017 15:33:11 +0100 pve-manager (5.1-38) stable; urgency=medium * ceph: create mon: fix & improve check if IP is in public net -- Proxmox Support Team Thu, 30 Nov 2017 11:35:28 +0100 pve-manager (5.1-37) stable; urgency=medium * fix #1523: Display the Max Backups field only if relevant * fix #1578: api/resource hastate: fallback to resource cfg state * fix #1539: add missing shellquote for proxied commands of pvesh * fix #1542: use percent_used key instead of calculation * fix wrong default value shown for the DHCP firewall option * prevent visual flashing of button when changing element in the tree * ceph: create pool: check for quorum at start * logrotate: try to tell services to reload instead of doing a full restart * add various status sub-icons in the tree * add a new status column in the resourcestore * add default 'unknown' status for vms and containers * add version GET parameter for js/css files to improve cache behaviour * reduce spiceproxy memory footpring by not loading an unused package * Add %-used and min_size to "pveceph lspools" command -- Proxmox Support Team Tue, 28 Nov 2017 16:38:15 +0100 pve-manager (5.1-36) unstable; urgency=medium * rebuild to fixup permissions -- Proxmox Support Team Wed, 25 Oct 2017 11:15:46 +0200 pve-manager (5.1-35) unstable; urgency=medium * bump for 5.1 release -- Proxmox Support Team Mon, 23 Oct 2017 09:18:30 +0200 pve-manager (5.0-34) unstable; urgency=medium * fix #1531: fix vm list in bulk actions when a cluster node's name is a prefix of another node's name * ceph: bluestore is now the default in the api and command line interfaces * Add a field to show which SCSI controller type we are currently using * Render full name of VirtIO Block controller * Update VM SCSI controller type after OS selection in Wizard * Update VM SCSI type based on iothread value when inside the wizard * Collect less frequently used guest system buttons under a 'More' button * Rename global 'Help' button to 'Documentation' * Add some help buttons to ceph UI * Use a comobo selector when adding guests to HA instead of a number field * Simplify HA state display * Various input focus improvements with the inline novnc console -- Proxmox Support Team Tue, 10 Oct 2017 14:16:12 +0200 pve-manager (5.0-32) unstable; urgency=medium * disable quota checkbox for unprivileged containers * rename pve-manager.service to pve-guests.service and refuse manual start/stop, since it's responsible for starting up autostarted guests at boot time and shutting _every_ guest down on shutdown, to avoid confusion about what happens when restarting the "pve manager" * show 'RBD' instead of 'RBD (external)' on storage summary * make bluestore the default choice when creating osds * add new "RBD (PVE)" storage choice * ceph: do not automatically use wal if only journal is given * rename 'Remove' ceph pool button to 'Destroy' * add add storages checkbox to ceph pool creation * add remove_storages parameter to the pool destruction * ceph/destroypool: optionally remove storages * ceph/createpool: optionally add storages -- Proxmox Support Team Tue, 12 Sep 2017 13:52:12 +0200 pve-manager (5.0-31) unstable; urgency=medium * lxc/qemu: hide migrate in contextmenu when no cluster or no rights * lxc: hide migrate button for non cluster setups * qemu: hide not usable buttons * pveceph: implement checks for ceph version & binaries * qemu: improve iothread/discard/controller type handling * ceph: adapt to new health output style for luminous * ceph: warning window modal * ceph: fix gui icons * ceph: add application parameter to createpool * ceph: make size 3/min 2 default with createpool -- Proxmox Support Team Fri, 1 Sep 2017 11:56:45 +0200 pve-manager (5.0-30) unstable; urgency=medium * ceph: improve bluestore information display -- Proxmox Support Team Tue, 8 Aug 2017 11:08:05 +0200 pve-manager (5.0-29) unstable; urgency=medium * ceph: ensure mgr starts after pve-cluster -- Proxmox Support Team Mon, 31 Jul 2017 15:46:57 +0200 pve-manager (5.0-28) unstable; urgency=medium * fix #1465: crush rule selection when creating pool * fix regression when creating first monitor of a ceph cluster * various bluestore and other ceph fixes -- Proxmox Support Team Mon, 31 Jul 2017 15:31:08 +0200 pve-manager (5.0-27) unstable; urgency=medium * pveceph: allow '-' in the service name pattern -- Proxmox Support Team Wed, 26 Jul 2017 16:51:29 +0200 pve-manager (5.0-26) unstable; urgency=medium * Close #1268: Show migration start server and migration end server * various GUI usability improvements * pveceph: added createmgr & destroymgr command * pveceph: creating a monitor now also creates a standard manager if not already present * pveceph: monitor and manager names now default to the node name rather than numeric IDs. -- Proxmox Support Team Wed, 26 Jul 2017 15:37:35 +0200 pve-manager (5.0-25) unstable; urgency=medium * Update ceph ui to use the restructured data format of ceph luminous 12.1.1 Older ceph versions are no longer be supported by the UI. -- Proxmox Support Team Mon, 24 Jul 2017 16:15:20 +0200 pve-manager (5.0-24) unstable; urgency=medium * Fix #1450: re-enable setgid bit on pvemailforward * Fix GUI issues with editing mount points which reside on storages for which the rootfs storage type has been removed. * Fix GUI issues when editing bind mounts for containers. * Fix OSD count display issue in the ceph dashboard. * Move OS type selection to after the installation medium selection in the VM creation wizard. * Fix 'pveceph createosd' to not to default to bluestore on newer ceph versions. (It has a --bluestore option after all.) * Added an informative empty-text when editing a container's DNS section. * remove old CA entry for enterprise repository, not required anymore -- Proxmox Support Team Wed, 19 Jul 2017 12:42:19 +0200 pve-manager (5.0-23) unstable; urgency=medium * add certificate authority for enterprise repository -- Proxmox Support Team Tue, 04 Jul 2017 11:50:24 +0200 pve-manager (5.0-22) unstable; urgency=medium * update lxc template list (aplinfo.dat) -- Proxmox Support Team Tue, 04 Jul 2017 08:18:30 +0200 pve-manager (5.0-21) unstable; urgency=medium * update lxc template list (aplinfo.dat) -- Proxmox Support Team Mon, 03 Jul 2017 16:08:10 +0200 pve-manager (5.0-20) unstable; urgency=medium * update german and italian translations * pvesr: allow schedule now from CLI -- Proxmox Support Team Fri, 30 Jun 2017 11:18:46 +0200 pve-manager (5.0-19) unstable; urgency=medium * pvesr status: handle disabled jobs * replication; merge status and status text * replication: show disabled jobs and allow enabling/disabling * Revert "add beta text with link to bugtracker" * replication: adapt help buttons reference * Add Help Button for Backup Modal Windows -- Proxmox Support Team Thu, 29 Jun 2017 12:01:46 +0200 pve-manager (5.0-18) unstable; urgency=medium * replication: fix issue when creating jobs for VMs on different cluster nodes -- Proxmox Support Team Wed, 28 Jun 2017 14:23:30 +0200 pve-manager (5.0-17) unstable; urgency=medium * replication GUI: add schedule now button * gui: drop cirrus from the GUI * replication: improve schedule format example * Add a checkbox 'Skip replication' * ceph: keys: add mgr allow * to client.admin * pveceph: createosd: allow to create bluestore OSDs * pveceph: init: add min_size, change default to 3/2 * PVE/API2/Replication.pm: call purge_old_states in run_jobs * replication/ui: improve wording for job removal * replication: refuse to create jobs with nothing to do * ceph: init: allow pool deletion by default -- Proxmox Support Team Wed, 28 Jun 2017 13:34:21 +0200 pve-manager (5.0-16) unstable; urgency=medium * fix lxc hostname input window * fix reselection on vm/ct migrate in gu -- Proxmox Support Team Fri, 23 Jun 2017 13:03:00 +0200 pve-manager (5.0-15) unstable; urgency=medium * pvesr.timer: set AccuracySec=1 -- Proxmox Support Team Fri, 23 Jun 2017 11:43:31 +0200 pve-manager (5.0-14) unstable; urgency=medium * add systemd timer unit to trigger pvesr run -- Proxmox Support Team Fri, 23 Jun 2017 10:48:20 +0200 pve-manager (5.0-13) unstable; urgency=medium * fix regression in gui when migrating guests * show resume button when qmpstatus is 'suspended' * add initramfs conf snippet disabling RESUME * better default column sizes for replication grid * change default replication status text to 'OK' * change short duration format to x.y * add replication to stateprovider dictionary * use git rev-parse for repoid * better Status description for jobs which are about to be run * use also a 150 pix width for Date in LXC Snapshot Tree * fix LXC Snapshots Edit Window timestamps -- Proxmox Support Team Thu, 22 Jun 2017 12:27:55 +0200 pve-manager (5.0-12) unstable; urgency=medium * OSD: rename 'remove' to 'destroy' * pvereport: improve output and add timeouts to commands * PVE/API2/Replication.pm: add $verbose parameter run_jobs() * update default aplinfo.dat * use 'any' for build architecture * fix #1414: use table layout instead of columns * add replication GUI * Fix #1372: require manually entering the Ceph Pool id before destroying a pool * Adapt SafeDestroy component to be able to delete Ceph Pools * implement digest checking for ReplicationConfig update * implement pvesr set_state * GUI: don't translate NDP * german translation update * italian translation update * translate params in bulk migrate window * change to debians font-awesome package * mark node shutdown/reboot buttons as dangerous * explicit set button focus respecting the 'dangerous' option * removed PVE/Replication.pm (moved to pve-guest-common) * use new replication helpers from pve-guest-common * change from dpkg-deb to dpkg-buildpackage * do not let www-data own the static js/html files * make language js files consistent (fix sorting) * add SOURCE_DATE_EPOCH to Makefile * Add force parameter for delete replica job * fix #1389: vzdump: handle storage failure in new() * show hostpci devices in gui * show usb devices in qemu har correct LWP https support) -- Proxmox Support Team Wed, 11 Sep 2013 06:46:44 +0200 pve-manager (3.1-8) unstable; urgency=low * fix https proxy calls (always use CONNECT) * use correct changelog URLs for pve repositories -- Proxmox Support Team Mon, 09 Sep 2013 11:39:49 +0200 pve-manager (3.1-7) unstable; urgency=low * vzdump: correctly handle maxfiles parameter (0 is unlimited) * improve API2Client.pm code -- Proxmox Support Team Thu, 05 Sep 2013 11:00:46 +0200 pve-manager (3.1-6) unstable; urgency=low * update German translation * update Chinese translation -- Proxmox Support Team Tue, 03 Sep 2013 07:03:02 +0200 pve-manager (3.1-5) unstable; urgency=low * apt: proxy changelog API call to correct node -- Proxmox Support Team Mon, 26 Aug 2013 10:24:53 +0200 pve-manager (3.1-4) unstable; urgency=low * apt: only consider installed packages -- Proxmox Support Team Fri, 23 Aug 2013 10:07:56 +0200 pve-manager (3.1-3) unstable; urgency=low * add new favicon.ico -- Proxmox Support Team Fri, 16 Aug 2013 13:08:07 +0200 pve-manager (3.1-2) unstable; urgency=low * fix perl dependencies * display subscription status after login -- Proxmox Support Team Fri, 16 Aug 2013 06:15:27 +0200 pve-manager (3.1-1) unstable; urgency=low * bump RELEASE to 3.1 -- Proxmox Support Team Wed, 14 Aug 2013 07:50:00 +0200 pve-manager (3.0-38) unstable; urgency=low * add GUI for GlusterFS storage * vzdump: wait one second before unmounting the snapshot (avoid device busy error) -- Proxmox Support Team Tue, 13 Aug 2013 10:32:05 +0200 pve-manager (3.0-37) unstable; urgency=low * apt: try to detect new packages * tell apt to use http_proxy settings * support to view changelogs for available pve packages * allow to configure cipher list for pveproxy * automatically add pve repository to apt sources list * allow to use serial terminal as display * avoid apt autoremoval for pve-kernel packages -- Proxmox Support Team Fri, 02 Aug 2013 10:11:33 +0200 pve-manager (3.0-36) unstable; urgency=low * fix proxy loop assertion for spiceproxy * pveproxy: use same cipher list as debian apache ssl.conf * avoid apt autoremoval for pve-kernel packages -- Proxmox Support Team Wed, 24 Jul 2013 12:43:38 +0200 pve-manager (3.0-35) unstable; urgency=low * fix proxy loop assertion -- Proxmox Support Team Tue, 23 Jul 2013 08:36:17 +0200 pve-manager (3.0-34) unstable; urgency=low * avoid proxy loops -- Proxmox Support Team Mon, 22 Jul 2013 10:52:50 +0200 pve-manager (3.0-33) unstable; urgency=low * correctly initialize $rpcenv in spiceproxy * fix bug #437: include pve-libspice-server1 in package list -- Proxmox Support Team Fri, 19 Jul 2013 11:41:00 +0200 pve-manager (3.0-32) unstable; urgency=low * improved spice proxy code -- Proxmox Support Team Thu, 18 Jul 2013 12:29:04 +0200 pve-manager (3.0-31) unstable; urgency=low * add button to start SPICE console * add spiceproxy server -- Proxmox Support Team Wed, 26 Jun 2013 13:40:55 +0200 pve-manager (3.0-30) unstable; urgency=low * fix upgrade shell (quoting bug) -- Proxmox Support Team Mon, 24 Jun 2013 08:18:47 +0200 pve-manager (3.0-29) unstable; urgency=low * new pveupgrade script, used to display additional information to the user (reboot required? database up to date? ...) * add button to display package versions, to provide same info as 'pveversion -v' on GUI. -- Proxmox Support Team Fri, 21 Jun 2013 12:07:44 +0200 pve-manager (3.0-28) unstable; urgency=low * fix bug #408: reset ENV before starting shell * fix bug #379: allow to overwrite existing CTs if user has VM.Backup permissions * Allow to send notification mail about new packages. -- Proxmox Support Team Thu, 20 Jun 2013 11:12:50 +0200 pve-manager (3.0-27) unstable; urgency=low * package manager: run system upgrade inside VNC shell, group packages by 'Origin', remove apt/upgrade API completely. -- Proxmox Support Team Wed, 19 Jun 2013 11:59:49 +0200 pve-manager (3.0-26) unstable; urgency=low * package manager: improve changelog viewer, bug fixes -- Proxmox Support Team Tue, 18 Jun 2013 11:49:16 +0200 pve-manager (3.0-25) unstable; urgency=low * add package update manager to GUI -- Proxmox Support Team Thu, 13 Jun 2013 13:09:02 +0200 pve-manager (3.0-24) unstable; urgency=low * update Norwegian translations * rrd display : avoid 2 refresh * avoid gzip http response for png & gif & jar -- Proxmox Support Team Wed, 12 Jun 2013 07:24:54 +0200 pve-manager (3.0-23) unstable; urgency=low * fix bug #368: use vtype 'DnsName' to verify host names * fix bug #401: disable connection timeout during API call processing * add suport for new qemu-server async configuration API -- Proxmox Support Team Fri, 07 Jun 2013 11:52:15 +0200 pve-manager (3.0-22) unstable; urgency=low * support 'delete' flag for 'Move disk' -- Proxmox Support Team Fri, 31 May 2013 10:59:59 +0200 pve-manager (3.0-21) unstable; urgency=low * add 'Move disk' button for storage migration -- Proxmox Support Team Wed, 29 May 2013 13:03:33 +0200 pve-manager (3.0-20) unstable; urgency=low * fix login problem when http_proxy is set -- Proxmox Support Team Thu, 23 May 2013 07:29:25 +0200 pve-manager (3.0-19) unstable; urgency=low * updated Chinese translation * allow to upload files with spaces in filename (replace with '_') * allow to delete pools with non-existent VMs/Storage -- Proxmox Support Team Wed, 22 May 2013 06:04:49 +0200 pve-manager (3.0-18) unstable; urgency=low * use correct icons for templates * sort templates after regular VMs * update German translation * update French translation -- Proxmox Support Team Tue, 21 May 2013 10:58:47 +0200 pve-manager (3.0-17) unstable; urgency=low * fix bug #374: correctly remove destroyed container from pool -- Proxmox Support Team Tue, 14 May 2013 12:13:28 +0200 pve-manager (3.0-16) unstable; urgency=low * Clone: only list usable/available target stores -- Proxmox Support Team Tue, 14 May 2013 10:14:05 +0200 pve-manager (3.0-15) unstable; urgency=low * fix bug #385: correctly handle Accept-Encoding -- Proxmox Support Team Mon, 13 May 2013 09:12:41 +0200 pve-manager (3.0-14) unstable; urgency=low * qmtemplate task : format task description correctly -- Proxmox Support Team Fri, 10 May 2013 09:32:00 +0200 pve-manager (3.0-13) unstable; urgency=low * minor GUI cleanups -- Proxmox Support Team Tue, 07 May 2013 07:54:01 +0200 pve-manager (3.0-12) unstable; urgency=low * add Clone GUI -- Proxmox Support Team Mon, 06 May 2013 11:37:35 +0200 pve-manager (3.0-11) unstable; urgency=low * fix NodeSelector -- Proxmox Support Team Wed, 24 Apr 2013 09:56:26 +0200 pve-manager (3.0-10) unstable; urgency=low * pveproxy: implement if-modified-since * pveproxy: implement host based access control * implement node netstat call to get current tap network counters -- Proxmox Support Team Wed, 24 Apr 2013 08:05:11 +0200 pve-manager (3.0-9) unstable; urgency=low * http: improve security by setting size limits * stop keep-alive when there are many open connections * improve syslog for file uploads -- Proxmox Support Team Tue, 16 Apr 2013 11:56:00 +0200 pve-manager (3.0-8) unstable; urgency=low * disable Nagle algorithm to maximitze performance * fix multipart parser -- Proxmox Support Team Tue, 16 Apr 2013 07:43:56 +0200 pve-manager (3.0-7) unstable; urgency=low * use new event driven https server instead of apache2 (pveproxy) -- Proxmox Support Team Mon, 15 Apr 2013 12:31:50 +0200 pve-manager (3.0-6) unstable; urgency=low * depend on ibnet-http-perl (>= 6.06-1). Older versions triggers bugs with LWP::UserAgent -- Proxmox Support Team Thu, 28 Mar 2013 13:17:08 +0100 pve-manager (3.0-5) unstable; urgency=low * avoid warning about undefined value in PVE::OpenVZ -- Proxmox Support Team Wed, 27 Mar 2013 06:30:58 +0100 pve-manager (3.0-4) unstable; urgency=low * add bootlog to GUI -- Proxmox Support Team Tue, 26 Mar 2013 08:01:36 +0100 pve-manager (3.0-3) unstable; urgency=low * pvebanner: overwrite /etc/issue instead of printing to stdout -- Proxmox Support Team Mon, 25 Mar 2013 09:05:49 +0100 pve-manager (3.0-2) unstable; urgency=low * mark service vz optional in pve-manager init script -- Proxmox Support Team Fri, 22 Mar 2013 06:18:27 +0100 pve-manager (3.0-1) unstable; urgency=low * remove perl-suid dependency -- Proxmox Support Team Fri, 15 Mar 2013 08:36:57 +0100 pve-manager (2.3-13) unstable; urgency=low * network config: allow empty IP address/netmask -- Proxmox Support Team Tue, 05 Mar 2013 06:47:40 +0100 pve-manager (2.3-12) unstable; urgency=low * fix IP address verification (Undefined subroutine &Net::IP::ip_to_bin) -- Proxmox Support Team Mon, 04 Mar 2013 06:56:12 +0100 pve-manager (2.3-11) unstable; urgency=low * bugfix #301 Add container hostname validation in GUI -- Proxmox Support Team Fri, 01 Mar 2013 06:23:59 +0100 pve-manager (2.3-10) unstable; urgency=low * fix cache selector: default cache is 'none' -- Proxmox Support Team Mon, 25 Feb 2013 06:35:06 +0100 pve-manager (2.3-9) unstable; urgency=low * fix bug #337: avoid warning with pvectl -- Proxmox Support Team Fri, 22 Feb 2013 06:11:38 +0100 pve-manager (2.3-8) unstable; urgency=low * Allow to set tablet option on the GUI * use qcow2 format as default for directory and NFS storage * cleanup RDB GUI (remove authsupported) -- Proxmox Support Team Mon, 18 Feb 2013 13:39:47 +0100 pve-manager (2.3-7) unstable; urgency=low * fix javascript jslint warnings to make it work on all browsers. * use e1000 as default network card * enable RBD on the GUI -- Proxmox Support Team Thu, 31 Jan 2013 07:16:13 +0100 pve-manager (2.3-6) unstable; urgency=low * pvestatd: avoid warning about uninitialized value -- Proxmox Support Team Mon, 28 Jan 2013 12:19:34 +0100 pve-manager (2.3-5) unstable; urgency=low * Display 'Resume' button when VM is 'paused' -- Proxmox Support Team Fri, 18 Jan 2013 06:23:06 +0100 pve-manager (2.3-4) unstable; urgency=low * add balloon GUI (dynamic memory) -- Proxmox Support Team Thu, 17 Jan 2013 12:58:58 +0100 pve-manager (2.3-3) unstable; urgency=low * GUI: tasks - use better icon for open console * implement auto-ballooning -- Proxmox Support Team Thu, 20 Dec 2012 13:44:53 +0100 pve-manager (2.3-2) unstable; urgency=low * add HD resize feature to expand disks. -- Proxmox Support Team Mon, 17 Dec 2012 13:03:15 +0100 pve-manager (2.3-1) unstable; urgency=low * support new qemu vma backup files -- Proxmox Support Team Thu, 13 Dec 2012 07:27:32 +0100 pve-manager (2.2-32) unstable; urgency=low * add new cpu types: Haswell and Opteron_G5 * remove rhel specific cpu types: cpu64-rhel6 and cpu64-rhel5 -- Proxmox Support Team Tue, 27 Nov 2012 06:46:35 +0100 pve-manager (2.2-31) unstable; urgency=low * Brazilian Transtalion (done by Maila Networks) -- Proxmox Support Team Mon, 19 Nov 2012 13:17:23 +0100 pve-manager (2.2-30) unstable; urgency=low * add Norwegian (Bokmal and Nynorsk) translations. -- Proxmox Support Team Thu, 15 Nov 2012 07:31:30 +0100 pve-manager (2.2-29) unstable; urgency=low * fix bug #276: create root mount point -- Proxmox Support Team Mon, 05 Nov 2012 06:44:24 +0100 pve-manager (2.2-28) unstable; urgency=low * remove hardcoded blowfish cipher -- Proxmox Support Team Wed, 31 Oct 2012 14:01:54 +0100 pve-manager (2.2-27) unstable; urgency=low * fix RRD images caching problems: new create_rrd_graph returns rrd png data inline - no need to read data from file. -- Proxmox Support Team Wed, 31 Oct 2012 07:15:57 +0100 pve-manager (2.2-26) unstable; urgency=low * pvestatd: fix server reload (run at least 10 cycles) -- Proxmox Support Team Mon, 29 Oct 2012 13:08:20 +0100 pve-manager (2.2-25) unstable; urgency=low * pvestatd: fix server reload (due to memory leak) -- Proxmox Support Team Mon, 29 Oct 2012 12:32:28 +0100 pve-manager (2.2-24) unstable; urgency=low * vncproxy: wait until vnc port is ready (avoid connection errors) -- Proxmox Support Team Wed, 24 Oct 2012 09:02:08 +0200 pve-manager (2.2-23) unstable; urgency=low * update link to new debian-6.0-proxmox-mailgateway_3.1-2_amd64.tar.gz -- Proxmox Support Team Tue, 23 Oct 2012 10:27:18 +0200 pve-manager (2.2-22) unstable; urgency=low * vzdump: also run 'backup-start' hook in snapshot mode * update openvz appliance list * add win8 to OS type selector * fix bug #205 -- Proxmox Support Team Fri, 12 Oct 2012 06:07:12 +0200 pve-manager (2.2-21) unstable; urgency=low * openvz console fix: create /var/run/dtach at pvedaemon startup -- Proxmox Support Team Tue, 02 Oct 2012 10:10:55 +0200 pve-manager (2.2-20) unstable; urgency=low * openvz: use real console instead of 'vzctl enter' * openvz: remove init-logger pagers * dpenend on dtach (used by openvz console) * pvestatd: remove stale 'vzctl console' processes -- Proxmox Support Team Tue, 02 Oct 2012 06:49:12 +0200 pve-manager (2.2-19) unstable; urgency=low * fix bug 178: use new API call to get next free VMID -- Proxmox Support Team Thu, 27 Sep 2012 09:45:06 +0200 pve-manager (2.2-18) unstable; urgency=low * add workaroud to correctly show scrollbars -- Proxmox Support Team Wed, 26 Sep 2012 11:22:16 +0200 pve-manager (2.2-17) unstable; urgency=low * add snapshot support to GUI -- Proxmox Support Team Mon, 24 Sep 2012 12:05:34 +0200 pve-manager (2.1-16) unstable; urgency=low * vzrestore: allow --storage option * fix bug 178: correctly verify if VMID is already used * GUI: allow to select SCSI disks when creating VMs (booting from SCSI disks works again) -- Proxmox Support Team Wed, 05 Sep 2012 08:04:28 +0200 pve-manager (2.1-15) unstable; urgency=low * Slovenian translation (thanks to Dojan Borstnar) * new option to select SCSI controller hardware * add SATA to GUI -- Proxmox Support Team Wed, 29 Aug 2012 07:15:54 +0200 pve-manager (2.1-14) unstable; urgency=low * fix startup ordering -- Proxmox Support Team Tue, 07 Aug 2012 09:20:01 +0200 pve-manager (2.1-13) unstable; urgency=low * update Danish translation -- Proxmox Support Team Thu, 26 Jul 2012 14:24:27 +0200 pve-manager (2.1-12) unstable; urgency=low * pvestatd: use QMP to query detailed blockstats from KVM -- Proxmox Support Team Fri, 13 Jul 2012 09:36:54 +0200 pve-manager (2.1-11) unstable; urgency=low * added Polish translation -- Proxmox Support Team Thu, 28 Jun 2012 06:55:34 +0200 pve-manager (2.1-10) unstable; urgency=low * add Catalan translation -- Proxmox Support Team Thu, 14 Jun 2012 07:02:24 +0200 pve-manager (2.1-9) unstable; urgency=low * use numeric sorting in startall -- Proxmox Support Team Tue, 05 Jun 2012 06:16:06 +0200 pve-manager (2.1-8) unstable; urgency=low * also list pools with VM.Allocate permissions -- Proxmox Support Team Wed, 30 May 2012 11:20:45 +0200 pve-manager (2.1-7) unstable; urgency=low * fix vzdump --exclude-path (allow to read value from vzdump.conf) -- Proxmox Support Team Wed, 30 May 2012 07:24:30 +0200 pve-manager (2.1-6) unstable; urgency=low * include Danish translation -- Proxmox Support Team Tue, 29 May 2012 07:24:41 +0200 pve-manager (2.1-5) unstable; urgency=low * fixes for new pve-access-control (Auth plugins). -- Proxmox Support Team Tue, 22 May 2012 10:49:37 +0200 pve-manager (2.1-4) unstable; urgency=low * updated russian translation -- Proxmox Support Team Mon, 21 May 2012 07:46:39 +0200 pve-manager (2.1-3) unstable; urgency=low * fix vzdump parameter parser (allow --stdout) -- Proxmox Support Team Wed, 02 May 2012 11:12:56 +0200 pve-manager (2.1-2) unstable; urgency=low * set apache directory access options for all used dirs -- Proxmox Support Team Mon, 30 Apr 2012 11:00:49 +0200 pve-manager (2.1-1) unstable; urgency=low * added Turkish translation -- Proxmox Support Team Thu, 26 Apr 2012 06:16:55 +0200 pve-manager (2.0-64) unstable; urgency=low * fix bug #179: set default button 'no' for dangerous actions, use warning icon for such actions * fix bug #177: allow memory up to 512GB * fix bug #174: add cpuunits to KVM options -- Proxmox Support Team Tue, 24 Apr 2012 08:09:23 +0200 pve-manager (2.0-63) unstable; urgency=low * fix bug 128: implement pvectl startall/stopall * fix bug 171: activate storage before starting containers -- Proxmox Support Team Wed, 18 Apr 2012 10:02:54 +0200 pve-manager (2.0-62) unstable; urgency=low * fix bug #115: simplify GUI for users without permissions. * update Italian translation -- Proxmox Support Team Tue, 17 Apr 2012 10:37:05 +0200 pve-manager (2.0-61) unstable; urgency=low * add Italian translation -- Proxmox Support Team Mon, 16 Apr 2012 10:10:02 +0200 pve-manager (2.0-59) unstable; urgency=low * fix bug 158: move openvz scripts inside ocf resource agent -- Proxmox Support Team Thu, 12 Apr 2012 11:04:38 +0200 pve-manager (2.0-58) unstable; urgency=low * fix bug #141: allow to create backup job without compression * expose directsync drive cache option * add Turkish keyboard layout -- Proxmox Support Team Wed, 11 Apr 2012 08:38:59 +0200 pve-manager (2.0-57) unstable; urgency=low * fix support urls -- Proxmox Support Team Thu, 05 Apr 2012 11:40:03 +0200 pve-manager (2.0-56) unstable; urgency=low * added Russian translation -- Proxmox Support Team Thu, 05 Apr 2012 08:18:58 +0200 pve-manager (2.0-55) unstable; urgency=low * fix bug #135: allow single letter 'dns-name', allow to start names with numbers * fix bug #137: API change! Return node name using 'node' property. -- Proxmox Support Team Mon, 02 Apr 2012 12:13:33 +0200 pve-manager (2.0-54) unstable; urgency=low * use /etc/subscription to store subscription key * use http_proxy settings for subscription updates -- Proxmox Support Team Thu, 29 Mar 2012 11:13:35 +0200 pve-manager (2.0-53) unstable; urgency=low * fix bug #117: automatically add domain to hostname when creating openvz containers. -- Proxmox Support Team Thu, 29 Mar 2012 10:19:57 +0200 pve-manager (2.0-52) unstable; urgency=low * fix Subscription code -- Proxmox Support Team Thu, 29 Mar 2012 09:32:32 +0200 pve-manager (2.0-51) unstable; urgency=low * fix bug #55: add Migrate and Stop to context menu -- Proxmox Support Team Wed, 28 Mar 2012 13:12:19 +0200 pve-manager (2.0-50) unstable; urgency=low * kvm network: allow to configure VLAN Id on the GUI -- Proxmox Support Team Wed, 28 Mar 2012 07:11:55 +0200 pve-manager (2.0-49) unstable; urgency=low * improve HA task display -- Proxmox Support Team Tue, 27 Mar 2012 12:35:00 +0200 pve-manager (2.0-48) unstable; urgency=low * fix bug #97: execute 'clusvcadm' commands for HA managed CTs -- Proxmox Support Team Tue, 27 Mar 2012 10:59:33 +0200 pve-manager (2.0-47) unstable; urgency=low * fix bug 114: do not display 'nothing selected' after logout -- Proxmox Support Team Mon, 26 Mar 2012 13:28:09 +0200 pve-manager (2.0-46) unstable; urgency=low * code cleanups -- Proxmox Support Team Mon, 26 Mar 2012 10:38:33 +0200 pve-manager (2.0-45) unstable; urgency=low * fix bug 124: correctly return maxfiles flag * vzdump: use storage 'local' as default backup target (instead of using Openvz dump directory settings) -- Proxmox Support Team Fri, 23 Mar 2012 12:36:15 +0100 pve-manager (2.0-44) unstable; urgency=low * Disable automatic file removal on 'Backup now' * Option 'maxfiles' is now a storage option (to specify the maximal number of allowed backups per VM) -- Proxmox Support Team Fri, 23 Mar 2012 10:03:23 +0100 pve-manager (2.0-43) unstable; urgency=low * vzdump: do not use tar flag --ignore-failed-read -- Proxmox Support Team Wed, 21 Mar 2012 06:42:07 +0100 pve-manager (2.0-42) unstable; urgency=low * use Digest::SHA instead of Digest::SHA1 -- Proxmox Support Team Tue, 20 Mar 2012 12:33:19 +0100 pve-manager (2.0-41) unstable; urgency=low * add Chinese translation -- Proxmox Support Team Thu, 15 Mar 2012 10:51:11 +0100 pve-manager (2.0-40) unstable; urgency=low * fix bug 22: correctly display openvz swap usage -- Proxmox Support Team Wed, 14 Mar 2012 16:00:32 +0100 pve-manager (2.0-39) unstable; urgency=low * add Spanish translation * Do not allow to select SCSI inside the VM creation wizard, because booting from SCSI does not work with current kvm version -- Proxmox Support Team Fri, 02 Mar 2012 10:49:12 +0100 pve-manager (2.0-38) unstable; urgency=low * fix bug 101: vzdump use run_command to avoid locale errors -- Proxmox Support Team Thu, 01 Mar 2012 10:45:40 +0100 pve-manager (2.0-37) unstable; urgency=low * updated fr translation -- Proxmox Support Team Wed, 29 Feb 2012 12:37:29 +0100 pve-manager (2.0-36) unstable; urgency=low * cleanup and fix openvz vswap handling -- Proxmox Support Team Wed, 29 Feb 2012 09:20:58 +0100 pve-manager (2.0-35) unstable; urgency=low * avoid warning in pvestatd for containers with old config files -- Proxmox Support Team Mon, 27 Feb 2012 11:37:48 +0100 pve-manager (2.0-34) unstable; urgency=low * add Swedish keyboard layout -- Proxmox Support Team Mon, 27 Feb 2012 09:51:19 +0100 pve-manager (2.0-33) unstable; urgency=low * fix file upload permission checks -- Proxmox Support Team Wed, 22 Feb 2012 09:14:05 +0100 pve-manager (2.0-32) unstable; urgency=low * added French translation * expose all ne CPU models on the GUI * skip fuzzy translations (avoid wrong translation on GUI) -- Proxmox Support Team Wed, 22 Feb 2012 07:23:21 +0100 pve-manager (2.0-31) unstable; urgency=low * add template download GUI * include turnkey appliances in download list. -- Proxmox Support Team Tue, 21 Feb 2012 11:45:07 +0100 pve-manager (2.0-30) unstable; urgency=low * add unmount button to openvz GUI -- Proxmox Support Team Mon, 20 Feb 2012 10:11:13 +0100 pve-manager (2.0-29) unstable; urgency=low * fix datacenter options GUI * fix German translation -- Proxmox Support Team Mon, 20 Feb 2012 06:52:32 +0100 pve-manager (2.0-28) unstable; urgency=low * another fix for vnc shell to nodes -- Proxmox Support Team Fri, 17 Feb 2012 06:06:55 +0100 pve-manager (2.0-27) unstable; urgency=low * fix vnc shell to nodes -- Proxmox Support Team Thu, 16 Feb 2012 08:21:00 +0100 pve-manager (2.0-26) unstable; urgency=low * fix bug #1: allow to use iscsi devices directly -- Proxmox Support Team Wed, 15 Feb 2012 10:54:50 +0100 pve-manager (2.0-25) unstable; urgency=low * pveversion: display status of resource-agents-pve and fence-agents-pve -- Proxmox Support Team Tue, 14 Feb 2012 12:57:11 +0100 pve-manager (2.0-24) unstable; urgency=low * fix log viewer (correctly refresh display) -- Proxmox Support Team Tue, 14 Feb 2012 09:01:07 +0100 pve-manager (2.0-23) unstable; urgency=low * fix openvz live migration -- Proxmox Support Team Mon, 13 Feb 2012 09:28:25 +0100 pve-manager (2.0-22) unstable; urgency=low * fix lint errors * fix compression selector -- Proxmox Support Team Fri, 10 Feb 2012 12:26:39 +0100 pve-manager (2.0-21) unstable; urgency=low * fix postinst script (write correct /root/.forward) -- Proxmox Support Team Fri, 10 Feb 2012 11:13:58 +0100 pve-manager (2.0-20) unstable; urgency=low * improve user management * implement permission checks * improve backup GUI (allow to select lzo/gzip) * add pools to resource list * fix bug #85: allow root@pam to generate tickets for other users * fix bug #86: correctly decode cookie -- Proxmox Support Team Tue, 17 Jan 2012 06:36:23 +0100 pve-manager (2.0-19) unstable; urgency=low * depend on resource-agents-pve * depend on fence-agents-pve * fix Danish kvm keyboard name (use 'da' instead of 'dk') -- Proxmox Support Team Mon, 09 Jan 2012 10:13:00 +0100 pve-manager (2.0-18) unstable; urgency=low * add Datacenter summary * use NFS version 3 by default when creating a new NFS storage. -- Proxmox Support Team Fri, 23 Dec 2011 10:39:34 +0100 pve-manager (2.0-17) unstable; urgency=low * new HA configuration panel -- Proxmox Support Team Thu, 22 Dec 2011 14:00:22 +0100 pve-manager (2.0-16) unstable; urgency=low * improve OpenVZ API (impl. shutdown) * improve HA resource agent -- Proxmox Support Team Thu, 15 Dec 2011 13:48:39 +0100 pve-manager (2.0-15) unstable; urgency=low * add HA resource agent -- Proxmox Support Team Tue, 13 Dec 2011 10:18:20 +0100 pve-manager (2.0-14) unstable; urgency=low * add Japanese translation (many thanks to Koichi!) -- Proxmox Support Team Thu, 08 Dec 2011 11:11:25 +0100 pve-manager (2.0-13) unstable; urgency=low * implemente openvz migration ('pvectl migrate') -- Proxmox Support Team Fri, 02 Dec 2011 10:37:28 +0100 pve-manager (2.0-12) unstable; urgency=low * minor bug fixes -- Proxmox Support Team Tue, 29 Nov 2011 10:12:20 +0100 pve-manager (2.0-11) unstable; urgency=low * start i18n support -- Proxmox Support Team Fri, 25 Nov 2011 09:23:00 +0100 pve-manager (2.0-10) unstable; urgency=low * add context menus -- Proxmox Support Team Mon, 14 Nov 2011 12:46:44 +0100 pve-manager (2.0-9) unstable; urgency=low * improved GUI -- Proxmox Support Team Fri, 11 Nov 2011 13:42:04 +0100 pve-manager (2.0-8) unstable; urgency=low * implement vzdump and backup/restore GUI * implement qemu monitor -- Proxmox Support Team Wed, 09 Nov 2011 09:58:56 +0100 pve-manager (2.0-7) unstable; urgency=low * imlement openvz GUI -- Proxmox Support Team Fri, 07 Oct 2011 13:56:03 +0200 pve-manager (2.0-6) unstable; urgency=low * implemented openvz vnc console * fix bug #4, #5, #6 and #8 -- Proxmox Support Team Wed, 05 Oct 2011 10:52:53 +0200 pve-manager (2.0-5) unstable; urgency=low * implemented openvz create wizard * avoid error in dpkg triggers -- Proxmox Support Team Tue, 04 Oct 2011 07:03:50 +0200 pve-manager (2.0-4) unstable; urgency=low * fixes in pvestatd -- Proxmox Support Team Fri, 05 Aug 2011 08:56:07 +0200 pve-manager (2.0-3) unstable; urgency=low * implemented storage configuration interface -- Proxmox Support Team Fri, 29 Jul 2011 08:59:14 +0200 pve-manager (2.0-2) unstable; urgency=low * fix console size * fix dns network editor -- Proxmox Support Team Mon, 27 Jun 2011 12:39:18 +0200 pve-manager (2.0-1) unstable; urgency=low * prototype for 2.0 -- Proxmox Support Team Tue, 16 Feb 2010 10:17:25 +0100 pve-manager (1.5-7) unstable; urgency=low * correctly display cpu usage and avoid warning about undefined values. * display 'used' bytes in storage browser. -- Proxmox Support Team Thu, 11 Feb 2010 10:30:14 +0100 pve-manager (1.5-6) unstable; urgency=low * correctly display uptime for kernel 2.6.18 -- Proxmox Support Team Mon, 08 Feb 2010 14:22:10 +0100 pve-manager (1.5-5) unstable; urgency=low * updated russian translation * updated japanese translation -- Proxmox Support Team Fri, 15 Jan 2010 10:18:58 +0100 pve-manager (1.5-4) unstable; urgency=low * fix small bug in template list -- Proxmox Support Team Thu, 14 Jan 2010 14:40:12 +0100 pve-manager (1.5-3) unstable; urgency=low * updated appliance template list -- Proxmox Support Team Thu, 14 Jan 2010 10:22:24 +0100 pve-manager (1.5-2) unstable; urgency=low * add CPUs settings for OpenVZ (work now withe kernel 2.6.18) -- Proxmox Support Team Tue, 12 Jan 2010 09:42:08 +0100 pve-manager (1.5-1) unstable; urgency=low * updated vietnamese translations * show all bridges (0-999) when creating KVM VMs * show all installed pve kernels with pveversion -- Proxmox Support Team Fri, 18 Dec 2009 09:52:36 +0100 pve-manager (1.4-10) unstable; urgency=low * updated brasilian translation -- Proxmox Support Team Mon, 02 Nov 2009 12:04:02 +0100 pve-manager (1.4-9) unstable; urgency=low * minor GUI updates -- Proxmox Support Team Fri, 09 Oct 2009 09:41:26 +0200 pve-manager (1.4-8) unstable; urgency=low * updated italian translation * list backup files on web interface -- Proxmox Support Team Thu, 08 Oct 2009 13:36:52 +0200 pve-manager (1.4-7) unstable; urgency=low * separate page/memu for ISO uploads (for new storage model) * fix pveversion bug -- Proxmox Support Team Wed, 07 Oct 2009 13:10:30 +0200 pve-manager (1.4-6) unstable; urgency=low * support new storage model for backup configuration -- Proxmox Support Team Mon, 21 Sep 2009 12:54:55 +0200 pve-manager (1.4-5) unstable; urgency=low * updated Vietnamese translations * support up to 1000 bridges * avoid excessive logs in pevtunnel -- Proxmox Support Team Fri, 18 Sep 2009 10:34:31 +0200 pve-manager (1.4-4) unstable; urgency=low * updated Vietnamese translations * fix SOAP serializer bug -- Proxmox Support Team Thu, 17 Sep 2009 13:07:39 +0200 pve-manager (1.4-3) unstable; urgency=low * added Vietnamese and Polish translations -- Proxmox Support Team Wed, 16 Sep 2009 11:05:31 +0200 pve-manager (1.4-2) unstable; urgency=low * support new socket/cores feature -- Proxmox Support Team Tue, 15 Sep 2009 11:48:32 +0200 pve-manager (1.4-1) unstable; urgency=low * use new storage manager framework * implemented SOAP authentication framework (use tickets) * depend on libterm-readline-gnu-perl -- Proxmox Support Team Fri, 03 Jul 2009 14:44:30 +0200 pve-manager (1.3-1) unstable; urgency=low * recompile for 1.3 -- Proxmox Support Team Tue, 02 Jun 2009 14:26:25 +0200 pve-manager (1.2-2) unstable; urgency=low * depend on netcat-traditional, conflict with netcat-openbsd -- Proxmox Support Team Wed, 13 May 2009 10:13:11 +0200 pve-manager (1.2-1) unstable; urgency=low * prepare for debian lenny * move /var/www/* to /usr/share/pve-manager/* * use externale libjs-prototype library * remove NoCachePNG.pm (we do not use it) * use 'configure' instead of hardcoded paths in makefile * pve.conf.in - substitute paths with configure -- Proxmox Support Team Fri, 24 Apr 2009 08:07:53 +0200 pve-manager (1.1-4) unstable; urgency=low * add 'stardate' option for kvm -- Proxmox Support Team Mon, 2 Feb 2009 09:51:40 +0100 pve-manager (1.1-3) unstable; urgency=low * set max memory to 64GB -- Proxmox Support Team Tue, 27 Jan 2009 08:18:53 +0100 pve-manager (1.1-1) unstable; urgency=low * do not start container when setting passwords * Avoids ghost tasks when PIDs are recycled * logfile viewer: filter some terminal escape codes -- Proxmox Support Team Mon, 12 Jan 2009 13:03:17 +0100 pve-manager (1.0-11) unstable; urgency=low * added chinese translation -- Proxmox Support Team Thu, 18 Dec 2008 09:31:45 +0100 pve-manager (1.0-10) unstable; urgency=low * fix broken vznetaddbr script -- Proxmox Support Team Mon, 24 Nov 2008 12:50:50 +0100 pve-manager (1.0-9) unstable; urgency=low * fix shell metacharacter problem * new vznetaddbr script -- Proxmox Support Team Wed, 19 Nov 2008 12:53:18 +0100 pve-manager (1.0-8) unstable; urgency=low * fix RFB protocol problems -- Proxmox Support Team Thu, 13 Nov 2008 13:16:54 +0100 pve-manager (1.0-7) unstable; urgency=low * small fixes -- Proxmox Support Team Tue, 11 Nov 2008 11:04:22 +0100 pve-manager (1.0-1) unstable; urgency=low * many update, bug fixes, new languages -- Proxmox Support Team Wed, 22 Oct 2008 10:58:58 +0200 pve-manager (0.9-4) unstable; urgency=low * updates for new kvm, bug fixes -- Proxmox Support Team Tue, 22 Jul 2008 10:23:10 +0200 pve-manager (0.9-1) unstable; urgency=low * initial import -- Proxmox Support Team Fri, 23 Nov 2007 13:15:54 +0100