libpve-common-perl (6.2-4) pve pmg; urgency=medium

  * fix #3108: properly check IPv6 local address

  * systemd: add helpers for parsing unit files

  * network config parser: allow bond of bond

  * ProcFSTools: add helper methods to read CPU/Memory/IO pressure metrics

 -- Proxmox Support Team <support@proxmox.com>  Thu, 05 Nov 2020 10:55:57 +0100

libpve-common-perl (6.2-3) pve pmg; urgency=medium

  * properly encode CLI tool's output when using YAML output-format via
    YAML::XS

  * fix the behavior of the sync_mountpoint helper and improve its error
    propagation

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Sep 2020 17:33:56 +0200

libpve-common-perl (6.2-2) pve pmg; urgency=medium

  * sendmail helper: only send multipart if necessary

  * sendmail helper: allow empty display name in "from" field

  * CLI option parser: allow ommiting optional positional arguemnts, if there's
    no ambiguity about it.

 -- Proxmox Support Team <support@proxmox.com>  Mon, 07 Sep 2020 10:01:03 +0200

libpve-common-perl (6.2-1) pve pmg; urgency=medium

  * file get contents: bump default size limit to 512k to match pmxcfs max file
    size

  * run command helper: improve performance for logging and long lines

  * run command helper: fix matching of \r\n line ending

 -- Proxmox Support Team <support@proxmox.com>  Wed, 19 Aug 2020 12:29:06 +0200

libpve-common-perl (6.1-5) pve pmg; urgency=medium

  * JSONSchema: add format validator support and cleanup check_format

  * sendmail: separate 'mailto' list from the rest of the parameters

 -- Proxmox Support Team <support@proxmox.com>  Tue, 07 Jul 2020 19:26:58 +0200

libpve-common-perl (6.1-4) pve pmg; urgency=medium

  * fix #2374: bridge-ports is assumed to be defined

  * schema: register timezone format and add verification method

  * fix #2796: debian/postinst: check for existing /etc/aliases

 -- Proxmox Support Team <support@proxmox.com>  Fri, 03 Jul 2020 14:16:49 +0200

libpve-common-perl (6.1-3) pve pmg; urgency=medium

  * network: vlan-aware bridge: fix PVID when trunks are defined

  * Add total sum of physical CPU core count to CPU info used by node status
    API call

  * netowrk: always autostart bond slaves interfaces

 -- Proxmox Support Team <support@proxmox.com>  Mon, 08 Jun 2020 17:37:11 +0200

libpve-common-perl (6.1-2) pve pmg; urgency=medium

  * fix adding VLAN trunks to virtual guests NICs

 -- Proxmox Support Team <support@proxmox.com>  Sat, 09 May 2020 21:00:29 +0200

libpve-common-perl (6.1-1) pve pmg; urgency=medium

  * fix #2696: avoid 'undefined value' warning in unkown commands

  * ProcFSTools: fix read_meminfo without KSM

  * network: fix adding vlan tags to bridge

 -- Proxmox Support Team <support@proxmox.com>  Wed, 06 May 2020 12:14:19 +0200

libpve-common-perl (6.0-20) pve pmg; urgency=medium

  * network: replace system() with run_command()

  * acme: split out into new package proxmox-acme-perl

 -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Apr 2020 10:03:53 +0200

libpve-common-perl (6.0-19) pve pmg; urgency=medium

  * cpuset: cgroupv2 support and cleanup/refactor

  * cpuset: allow empty cpusets

  * JSONSchema: add acme-plugin-format

  * JSONSchema: add idmap parser and storagepair format

 -- Proxmox Support Team <support@proxmox.com>  Sat, 04 Apr 2020 19:55:24 +0200

libpve-common-perl (6.0-18) pve pmg; urgency=medium

  * ldap: add optional classes to query_users and use them to filter

  * ldap: optionally save group name by attribute

 -- Proxmox Support Team <support@proxmox.com>  Sat, 21 Mar 2020 16:49:47 +0100

libpve-common-perl (6.0-17) pve pmg; urgency=medium

  * inotify: ensure backwards compatibility on interface read

  * normalize cidr, address and netmask entries.

 -- Proxmox Support Team <support@proxmox.com>  Fri, 13 Mar 2020 12:24:58 +0100

libpve-common-perl (6.0-16) pve pmg; urgency=medium

  * notify: fix compatibility when address and netmask got passed separately on
    write

 -- Proxmox Support Team <support@proxmox.com>  Thu, 12 Mar 2020 16:15:17 +0100

libpve-common-perl (6.0-15) pve pmg; urgency=medium

  * inotify: read interfaces: avoid uninitialized value access

  * RESTHandler getopt_usage: schema properties can be optional

  * add ldap-simple-attr format from Proxmox Mailgateway for reuse

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Mar 2020 17:01:42 +0100

libpve-common-perl (6.0-14) pve pmg; urgency=medium

  * INotify: use 'auto' for ovs interfaces with ifupdown2

  * INotify : fix OVSBond and OvsintPort order, and add more tests

 -- Proxmox Support Team <support@proxmox.com>  Sat, 07 Mar 2020 17:51:16 +0100

libpve-common-perl (6.0-13) pve pmg; urgency=medium

  * INotify: fix mtu check and add test

  * INotify : check_bridge : fix bridge-ports with vlan tagged interface

  * zsh-completion: Add missing "options end here flag" to compadd

  * get_ip_from_hostname: check all address we get from getaddrinfo_all for non-local IP

  * INotify: use cidr for address on config change

  * partially fix #2618: increase maximum port for spice to 61999

  * add LDAP Wrapper code from Mailgateway

 -- Proxmox Support Team <support@proxmox.com>  Wed, 04 Mar 2020 15:44:15 +0100

libpve-common-perl (6.0-12) pve pmg; urgency=medium

  * systemd: add un-/escape_unit helpers

  * procfs: add check_kernel_release

 -- Proxmox Support Team <support@proxmox.com>  Fri, 31 Jan 2020 10:32:59 +0100

libpve-common-perl (6.0-11) pve pmg; urgency=medium

  * ACME: use GET-as-POST call for compatibility with new API authorization
    requirements

  * API schema: add 'allowtoken' property

  * INotify network: improve vlan interface parsing

 -- Proxmox Support Team <support@proxmox.com>  Tue, 28 Jan 2020 11:33:21 +0100

libpve-common-perl (6.0-10) pve pmg; urgency=medium

  * INotify: add "bond-primary" and "ovs_mtu" option

  * INotify: allow vlan tagged bridge interface on non-vlanaware bridge

  * INotify: forbid ip address on bridged interface.

  * generate_csr: allow to set CN explicitly

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Jan 2020 17:51:58 +0100

libpve-common-perl (6.0-9) pve pmg; urgency=medium

  * add kernel_version helper to ProcFSTools

 -- Proxmox Support Team <support@proxmox.com>  Sat, 23 Nov 2019 16:15:10 +0100

libpve-common-perl (6.0-8) pve pmg; urgency=medium

  * fix Tools::df for big storage usage values

  * ProcFSTools: include ppid in read_proc_pid_stat

  * add new Kernel mount API wrappers and constants

  * ysFSTools: do not assume PCI domain 0000

 -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Nov 2019 18:43:05 +0100

libpve-common-perl (6.0-7) pve pmg; urgency=medium

  * cert: add fingerprint helper

  * JSONSchema: add pve-tag format

 -- Proxmox Support Team <support@proxmox.com>  Fri, 08 Nov 2019 12:48:29 +0100

libpve-common-perl (6.0-6) pve pmg; urgency=medium

  * fix #2433: add new TFA-secret format and support longer secrets

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Oct 2019 08:07:29 +0100

libpve-common-perl (6.0-5) pve pmg; urgency=medium

  * fix #2339: Handle multiple blank lines correctly in SectionConfig

  * add postinst hook to fix /etc/aliases whitespace error~

  * network: add uplink-id option

  * network: use 'allow-ovs' instead of 'auto' for OVSBridge to fix race
    with the then generated systemd ifup@.service on startup

  * network: handle autostart setting for OVS interfaces

 -- Proxmox Support Team <support@proxmox.com>  Fri, 20 Sep 2019 16:38:39 +0200

libpve-common-perl (6.0-4) pve pmg; urgency=medium

  * fix #2303: detect IPs of p2p interfaces

  * CLIHandler: consider all valid prefixes again for completion

  * Tools: add fchownat syscall

 -- Proxmox Support Team <support@proxmox.com>  Sat, 17 Aug 2019 11:31:24 +0200

libpve-common-perl (6.0-3) pve pmg; urgency=medium

  * cert: add public key type and size to info and JSON schema

  * include all available CPU flags in read_cpuinfo

  * add array_intersect method

 -- Proxmox Support Team <support@proxmox.com>  Tue, 23 Jul 2019 09:14:58 +0200

libpve-common-perl (6.0-2) pve pmg; urgency=medium

  * systemd: add wait_for_unit_removed helper

  * add fallback for CSRF token recognition

  * use hmac_sha256 when assembling CSRF token

 -- Proxmox Support Team <support@proxmox.com>  Mon, 24 Jun 2019 17:16:28 +0200

libpve-common-perl (6.0-1) pve pmg; urgency=medium

  * print defaulttxt as sprintf parameter

  * inotify: network/interfaces: fix 'Use of uninitialized value' for netmask

 -- Proxmox Support Team <support@proxmox.com>  Fri, 14 Jun 2019 20:28:56 +0200

libpve-common-perl (6.0-0+2) pve pmg; urgency=medium

  * fix authentication over spice client by ensuring ticket does not use an
    undefined variable

 -- Proxmox Support Team <support@proxmox.com>  Thu, 23 May 2019 13:00:15 +0200

libpve-common-perl (6.0-0+1) pve pmg; urgency=medium

  * bump version for buster

 -- Proxmox Support Team <support@proxmox.com>  Thu, 16 May 2019 17:10:47 +0200

libpve-common-perl (5.0-52) unstable; urgency=medium

  * INotify: map address and netmask also to IP/CIDR while parsing
    network interfaces

  * print api res: always allow result to be undef if optional

  * prevent adding options through autovivification in SectionConfig based
    modules

  * sort keys for stabillity when dumping config through JSONSchema

 -- Proxmox Support Team <support@proxmox.com>  Wed, 15 May 2019 14:14:02 +0200

libpve-common-perl (5.0-51) unstable; urgency=medium

  * Tools: add setresuid syscall

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 Apr 2019 11:04:23 +0000

libpve-common-perl (5.0-50) unstable; urgency=medium

  * JSONSchema: fix units of bwlimit property

  * add u2f challenge accessors and request host to RESTEnvironment

 -- Proxmox Support Team <support@proxmox.com>  Wed, 03 Apr 2019 13:53:12 +0200

libpve-common-perl (5.0-49) unstable; urgency=medium

  * JSONSchema: register pve-snapshot-name here to avoid cyclic
    dependencies

 -- Proxmox Support Team <support@proxmox.com>  Thu, 21 Mar 2019 12:50:26 +0100

libpve-common-perl (5.0-48) unstable; urgency=medium

  * JSONSchema: add 'mac-addr' standard option

  * JSONSchema: Adapt MAC address format to unicast

  * fix #2111: regex match for email addresses

 -- Proxmox Support Team <support@proxmox.com>  Thu, 14 Mar 2019 09:51:35 +0100

libpve-common-perl (5.0-47) unstable; urgency=medium

  * partially fix #2023: Switch to https for yubico.com API

  * Fix 1891: Add zsh command completion generator

 -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Feb 2019 12:23:56 +0100

libpve-common-perl (5.0-46) unstable; urgency=medium

  * add missing dependency on libhttp-daemon-perl, libhttp-manager-perl

 -- Proxmox Support Team <support@proxmox.com>  Mon, 11 Feb 2019 10:54:52 +0100

libpve-common-perl (5.0-45) unstable; urgency=medium

  * Tools: add fsync sycall

  * Tools: add dev_t_major/minor

 -- Proxmox Support Team <support@proxmox.com>  Mon, 04 Feb 2019 11:43:21 +0100

libpve-common-perl (5.0-44) unstable; urgency=medium

  * JSONSchema: Add format for MAC address verification

  * fix defaults for standard_output_options

 -- Proxmox Support Team <support@proxmox.com>  Tue, 22 Jan 2019 11:51:59 +0100

libpve-common-perl (5.0-43) unstable; urgency=medium

  * fix #1956: return controlling terminal to parent

  * Tools: cope with '0' in split_list

  * network: fix setting MTU on veth pair

  * SysFSTools: add helpers for mediated PCI devices

  * SysFSTools: allow one to return verbose information from lspci

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Nov 2018 11:19:46 +0100

libpve-common-perl (5.0-42) unstable; urgency=medium

  * fix #1548: replace perl use vars with our

  * introduce SysFSTools

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Nov 2018 13:45:54 +0100

libpve-common-perl (5.0-41) unstable; urgency=medium

  * fix #1938: increase filesize limit for /proc/mounts

  * inotify: network/interfaces: add support for 802.1ad stacked vlans

  * build: split deb target into deb and src

  * fix #1963: don't do day-time related math on time stamps

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 Oct 2018 14:58:42 +0100

libpve-common-perl (5.0-40) unstable; urgency=medium

  * minor fixup for startup order code

 -- Proxmox Support Team <support@proxmox.com>  Tue, 25 Sep 2018 11:33:34 +0200

libpve-common-perl (5.0-39) unstable; urgency=medium

  * fix #1914: CLIFormatter: check also for existence of type

  * generate_usage_str: do not group sub-commands

  * run_fork_with_timeout: handle SIGTERM

  * intoify: improve mtu/bridgebort checks

  * api_dump_full: reduce enumerated options to a single one

  * inotify: add methods for reading/writing /etc/hosts

 -- Proxmox Support Team <support@proxmox.com>  Thu, 20 Sep 2018 09:38:32 +0200

libpve-common-perl (5.0-38) unstable; urgency=medium

  * getopt_usage: do not display $standard_output_options

  * introcude new output format 'yaml'

  * PVE::CLIHandler - allow to define additional parameters for output
    formatter

  * PVE::ACME - untaint saved account data

  * api dump: do not skip indexed params with only one index

 -- Proxmox Support Team <support@proxmox.com>  Fri, 27 Jul 2018 10:54:59 +0200

libpve-common-perl (5.0-37) unstable; urgency=medium

  * make CLI standard options opt-in for commands

 -- Proxmox Support Team <support@proxmox.com>  Wed, 18 Jul 2018 10:47:33 +0200

libpve-common-perl (5.0-36) unstable; urgency=medium

  * fix #1819: fork_worker: ensure sync'ed workers control terminal

  * new class to generate and format CLI output, including common render
    methods, table borders and output formats

  * add vxlan interface support

  * initial ifupdown2 option support for bridge and bond interfaces

 -- Proxmox Support Team <support@proxmox.com>  Tue, 10 Jul 2018 13:56:37 +0200

libpve-common-perl (5.0-35) unstable; urgency=medium

  * replace read_password_func from cli handler with more flexible param
    mapping

  * add print_text_table and print_api_result helper

 -- Proxmox Support Team <support@proxmox.com>  Wed, 27 Jun 2018 12:33:09 +0200

libpve-common-perl (5.0-34) unstable; urgency=medium

  * split out systemd specific code to own perl module

 -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Jun 2018 12:05:54 +0200

libpve-common-perl (5.0-33) unstable; urgency=medium

  * only show subcommand specific usage if command incomplete

  * filter out aliases when trying to expand command

  * fix handling unknown commands

  * add a generalized 'read and confirm password' sub

  * improve bash completion

  * fix getopt when invoking without arguments

  * ensure errors from forked commands get returned correctly

 -- Proxmox Support Team <support@proxmox.com>  Thu, 14 Jun 2018 09:15:41 +0200

libpve-common-perl (5.0-32) unstable; urgency=medium

  * fix #1766: compare task start time numerically

  * add helper to dump API with resolved references

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 May 2018 07:33:47 +0200

libpve-common-perl (5.0-31) unstable; urgency=medium

  * add ACME library and challenge plugins

  * add Certificate helper

  * untaint PVE::Tools::df() return values

 -- Proxmox Support Team <support@proxmox.com>  Fri, 04 May 2018 12:39:02 +0200

libpve-common-perl (5.0-30) unstable; urgency=medium

  * pty: fix read_password prototype

  * cli: more generic interactive parameter definition

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Mar 2018 09:08:08 +0100

libpve-common-perl (5.0-29) unstable; urgency=medium

  * CLIHandler: fix command usage string generation

  * fix #1682: handle relative years absolutely

  * introduce compute_param_mapping_hash helper

 -- Proxmox Support Team <support@proxmox.com>  Fri, 09 Mar 2018 08:56:03 +0100

libpve-common-perl (5.0-28) unstable; urgency=medium

  * net: replace brctl with iproute2 calls

  * schema: add bwlimit standard option and format

  * schema: allow ipv6 prefix lengths up to 128

  * net: remove flowid in traffic limit commands

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Feb 2018 11:41:12 +0100

libpve-common-perl (5.0-27) unstable; urgency=medium

  * minor code updates for better reusability

 -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Jan 2018 15:03:12 +0100

libpve-common-perl (5.0-26) unstable; urgency=medium

  * support sub command structures for command line utilities

  * JSONSchema: add fingerprint-sha256 standard option

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 Jan 2018 09:27:50 +0100

libpve-common-perl (5.0-25) unstable; urgency=medium

  * fix issue where 0.5MB converted to GB becomes 0

  * fix issue which caused the web GUI to not show a new login window when the
    ticket becomes invalid (eg. timed out)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Dec 2017 13:25:41 +0100

libpve-common-perl (5.0-24) unstable; urgency=medium

  * let password queries be cancelled via Ctrl+C again

  * improve vnc port allocation stability

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Dec 2017 15:05:05 +0100

libpve-common-perl (5.0-23) unstable; urgency=medium

  * added pty handling modules for upcoming pve-xtermjs package

 -- Proxmox Support Team <support@proxmox.com>  Mon, 04 Dec 2017 10:14:24 +0100

libpve-common-perl (5.0-22) unstable; urgency=medium

  * daemon: fix termination of busy workers on reload

 -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Nov 2017 14:22:07 +0100

libpve-common-perl (5.0-21) unstable; urgency=medium

  * daemon: refactor and cleanup

  * daemon: don't send SIGTERM before restart on leave_children_open_on_reload

  * lock_file_full: add missing trailing newline

  * JSONSchema.pm - add a 'download' attribute

 -- Proxmox Support Team <support@proxmox.com>  Tue, 14 Nov 2017 08:01:25 +0100

libpve-common-perl (5.0-20) unstable; urgency=medium

  * tools: add run_fork

 -- Proxmox Support Team <support@proxmox.com>  Tue, 17 Oct 2017 15:08:48 +0200

libpve-common-perl (5.0-19) unstable; urgency=medium

  * PVE::Subscription - new class to simplify subscription management

  * ProcFSTools:read_proc_mounts: increase read size

  * tools: df: handle a failing df

 -- Proxmox Support Team <support@proxmox.com>  Tue, 03 Oct 2017 11:34:44 +0200

libpve-common-perl (5.0-18) unstable; urgency=medium

  * use double hyphens for command options in the documentation

  * fix an issue with signal handlers being replaced leading to services not
    shutting down properly

  * tools: add `convert_size` for generic byte conversion

 -- Proxmox Support Team <support@proxmox.com>  Tue, 12 Sep 2017 13:40:53 +0200

libpve-common-perl (5.0-17) unstable; urgency=medium

  * api: fix rendering of filepath/string parameters

  * tools: add pipe_socket_to_command

  * JSONSchema: add parse_boolean helper

  * restenv: catch broadcast_tasklist errors gracefully

 -- Proxmox Support Team <support@proxmox.com>  Wed, 6 Sep 2017 09:34:43 +0200

libpve-common-perl (5.0-16) unstable; urgency=medium

  * add helper to time-out hard blocking operations (eg. on stale NFS mounts)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 30 Jun 2017 09:18:04 +0200

libpve-common-perl (5.0-15) unstable; urgency=medium

  * use more reliable checks in wait_for_vnc_port

 -- Proxmox Support Team <support@proxmox.com>  Tue, 27 Jun 2017 11:23:25 +0200

libpve-common-perl (5.0-14) unstable; urgency=medium

  * calendarevent: add the parsing error message to the format

  * calendarevent: add ability to have multiple timespecs for hours and minutes

  * calendarevent: trim event and check if empty

  * calendarevent: check range for start also without repetition

  * add and use physical NIC regexp

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Jun 2017 08:25:57 +0200

libpve-common-perl (5.0-13) unstable; urgency=medium

  * calendarevent: change sorting of hours and minutes to numeric

  * tools: next_unused_port: use IPPROTO_TCP explicitly

  * tools: unused ports: optional address parameter

  * PVE::JSONSchema - add proxyto_callback property

  * Revert "JSONSchema.pm: register new standard option pve-replicate

  * swap raw syscall numbers with syscall.ph for easier porting

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 May 2017 09:06:35 +0200

libpve-common-perl (5.0-12) unstable; urgency=medium

  * fix #1388: cpuset: sort members numerically

  * CalendarEvent.pm: implement parser/utils for systemd like calender exents

  * Tools: make file-locking aware of external exception sources

  * SectionConfig.pm: pass section data to format_section_header

  * JSONSchema.pm: register new standard option pve-replicate

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 May 2017 15:43:30 +0200

libpve-common-perl (5.0-11) unstable; urgency=medium

  * fix decoding of array and hash CLI parameters

  * add network hostname -> IP helpers

 -- Proxmox Support Team <support@proxmox.com>  Fri, 5 May 2017 12:39:00 +0200

libpve-common-perl (5.0-10) unstable; urgency=medium

  * mark decode_utf8_parameters() as depreciated

  * use Encode::Locale to encode parameters read from console(getopt)

 -- Proxmox Support Team <support@proxmox.com>  Tue, 02 May 2017 11:52:19 +0200

libpve-common-perl (5.0-9) unstable; urgency=medium

  * PVE::RESTEnvironment::get_user - add $noerr parameter

 -- Proxmox Support Team <support@proxmox.com>  Sat, 29 Apr 2017 08:28:11 +0200

libpve-common-perl (5.0-8) unstable; urgency=medium

  * remove wrong (and superfluous) range check in cpusets

 -- Proxmox Support Team <support@proxmox.com>  Thu, 20 Apr 2017 12:29:17 +0200

libpve-common-perl (5.0-7) unstable; urgency=medium

  * journal: allow filtering for a specific service

  * net: only disable ipv6 when creating a bridge/interface

  * fix uninitialized return code in run_command

 -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Apr 2017 16:07:18 +0200

libpve-common-perl (5.0-6) unstable; urgency=medium

  * Add utility subroutine to get the fully qualified domain name of a host

 -- Proxmox Support Team <support@proxmox.com>  Mon, 03 Apr 2017 11:07:47 +0200

libpve-common-perl (5.0-5) unstable; urgency=medium

  * PVE::Tools::encrypt_pw() - new helper

 -- Proxmox Support Team <support@proxmox.com>  Thu, 30 Mar 2017 17:50:44 +0200

libpve-common-perl (5.0-4) unstable; urgency=medium

  * OTP.pm: new class with OTP helpers

 -- Proxmox Support Team <support@proxmox.com>  Thu, 30 Mar 2017 17:40:11 +0200

libpve-common-perl (5.0-3) unstable; urgency=medium

  * Notify.pm: use Clone::clone instead of Storable::dclone

 -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Mar 2017 12:07:07 +0100

libpve-common-perl (5.0-2) unstable; urgency=medium

  * Add keeplocale parameter required by some API commands

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Mar 2017 15:02:41 +0100

libpve-common-perl (5.0-1) unstable; urgency=medium

  * bump version for Debian Stretch

 -- Proxmox Support Team <support@proxmox.com>  Wed, 8 Mar 2017 10:27:09 +0100

libpve-common-perl (4.0-93) unstable; urgency=medium

  * SectionConfig::check_value: return bool/numbers as numeric value

  * JSONSchema::check_type: return success (not value)

  * RESTEnvironment->init_request: reset result_attributes

  * SectionConfig: add new parameter $skip_type to createSchema()

  * SectionConfig:write_config: sort options by key name

  * SectionConfig: allow to get class specific updateSchema()

  * (maybe) fixes #1229: fix port reservation

  * Fix example to latest RestHandler

 -- Proxmox Support Team <support@proxmox.com>  Wed, 08 Mar 2017 06:17:44 +0100

libpve-common-perl (4.0-92) unstable; urgency=medium

  * stop using ifconfig from net-tools

  * schema updates

 -- Proxmox Support Team <support@proxmox.com>  Thu, 09 Feb 2017 11:39:13 +0100

libpve-common-perl (4.0-91) unstable; urgency=medium

  * Fix interface writer for bridge_ports and slaves.

  * ensure correct upgrade path

 -- Proxmox Support Team <support@proxmox.com>  Mon, 6 Feb 2017 14:45:20 +0100

libpve-common-perl (4.0-90) unstable; urgency=medium

  * RESTEnvironment: let check_worker take a $self

 -- Proxmox Support Team <support@proxmox.com>  Fri, 27 Jan 2017 10:57:13 +0100

libpve-common-perl (4.0-89) unstable; urgency=medium

  * fix #1232: cleanup bridges on veth_delete

  * split abstract base modules into separate libpve-guest-common-perl package

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Jan 2017 09:10:47 +0100

libpve-common-perl (4.0-88) unstable; urgency=medium

  * PVE::Ticket - new helper class to create auth tickets

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Jan 2017 12:53:08 +0100

libpve-common-perl (4.0-87) unstable; urgency=medium

  * RESTHandler.pm: remove register_page_formatter (no longer required)

  * JSONSchema: remove formatter option

  * PVE::RESTEnvironment: new base class for PVE::RPCEnvironment

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Jan 2017 09:09:15 +0100

libpve-common-perl (4.0-86) unstable; urgency=medium

  * CLIHandler.pm: remove calls to PVE::RPCEnvironment

  * CLIHandler.pm: add setup_environment hook

  * CLIHandler.pm: remove run as root restriction

 -- Proxmox Support Team <support@proxmox.com>  Fri, 13 Jan 2017 11:22:18 +0100

libpve-common-perl (4.0-85) unstable; urgency=medium

  * set 'snapshot-delete' lock when deleting snapshot

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Dec 2016 12:36:27 +0100

libpve-common-perl (4.0-84) unstable; urgency=medium

  * CpuSet short_string - avoid ranges like 0-0, 1-1, 2-2, ...

  * CpuSet write_to_cgroup: catch errors from close()

 -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Dec 2016 11:53:02 +0100

libpve-common-perl (4.0-83) unstable; urgency=medium

  * safe_read_from: add filename parameter to improve error messages

 -- Proxmox Support Team <support@proxmox.com>  Mon, 28 Nov 2016 07:45:43 +0100

libpve-common-perl (4.0-82) unstable; urgency=medium

  * cpuset: fix short_string

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Nov 2016 12:21:53 +0100

libpve-common-perl (4.0-81) unstable; urgency=medium

  * use better regex for remote ip check

  * schema_get_type_text: do not always expand enums

  * schema_get_type_text: render generic types as <type>

 -- Proxmox Support Team <support@proxmox.com>  Tue, 22 Nov 2016 11:50:30 +0100

libpve-common-perl (4.0-80) unstable; urgency=medium

  * use the pvecm mtunnel command to get remote migration ip

  * Fix #1188: tempfile: use /run by default

  * JSONSchema: allow named formats in parse_property_string

 -- Proxmox Support Team <support@proxmox.com>  Thu, 03 Nov 2016 09:45:31 +0100

libpve-common-perl (4.0-79) unstable; urgency=medium

  * CpuSet: read $MAX_CPUID from /proc/cpuinfo

  * CpuSet: new max_cpuid() method (replaces static class var)

  * add get_local_ip_from_cidr

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Oct 2016 17:45:04 +0200

libpve-common-perl (4.0-78) unstable; urgency=medium

  * CpuSet: add helper to format/print cpu sets

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Oct 2016 07:04:18 +0200

libpve-common-perl (4.0-77) unstable; urgency=medium

  * new class PVE::CpuSet: Simply class to handle cpu sets

 -- Proxmox Support Team <support@proxmox.com>  Wed, 26 Oct 2016 11:16:07 +0200

libpve-common-perl (4.0-76) unstable; urgency=medium

  * SectionConfig: always write out explicitly set booleans

 -- Proxmox Support Team <support@proxmox.com>  Thu, 20 Oct 2016 06:16:21 +0200

libpve-common-perl (4.0-75) unstable; urgency=medium

  * correct spelling of synopsis

 -- Proxmox Support Team <support@proxmox.com>  Fri, 07 Oct 2016 09:02:36 +0200

libpve-common-perl (4.0-74) unstable; urgency=medium

  * Network: add disable_ipv6 and use it

  * fix doc generator (do not convert efidisk0 to efidisk[N])

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Sep 2016 12:46:23 +0200

libpve-common-perl (4.0-73) unstable; urgency=medium

  * schema_get_type_text: always access values as number

  * add typetext property for more complex types

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Sep 2016 08:48:18 +0200

libpve-common-perl (4.0-72) unstable; urgency=medium

  * allow Regexp objects for strings in the schema

  * tools: optional prefix for random_ether_addr

  * harden file_set_contents against symlinks attacks (thanks to
    RACK911Labs.com for the hint)

  * backport file_copy from PVE 4

 -- Proxmox Support Team <support@proxmox.com>  Tue, 16 Aug 2016 16:53:36 +0200

libpve-common-perl (4.0-71) unstable; urgency=medium

  * fix mac address generation limitation

  * fix #1046: add non-snapshotted disks as unused

  * df: untaint the result

 -- Proxmox Support Team <support@proxmox.com>  Mon, 11 Jul 2016 11:29:42 +0200

libpve-common-perl (4.0-70) unstable; urgency=medium

  * Fix #132: hold a lock while setting up vlan bridges

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Jun 2016 11:21:16 +0200

libpve-common-perl (4.0-69) unstable; urgency=medium

  * vlan fixups: remove existing vlan ids

 -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Jun 2016 06:53:58 +0200

libpve-common-perl (4.0-68) unstable; urgency=medium

  * catch malformed mailto/mailfrom in sendmail

 -- Proxmox Support Team <support@proxmox.com>  Thu, 09 Jun 2016 17:56:26 +0200

libpve-common-perl (4.0-67) unstable; urgency=medium

  * added: enter_systemd_scope

  * move Network::get_active_interfaces to ProcFSTools

  * add netmasks starting from /8 to local netmask list

  * Consider /31 and /32 valid subnet masks

 -- Proxmox Support Team <support@proxmox.com>  Fri, 03 Jun 2016 11:27:13 +0200

libpve-common-perl (4.0-66) unstable; urgency=medium

  * added: openat, mkdirat

  * Allow O_PATH and O_TMPFILE to be exported

 -- Proxmox Support Team <support@proxmox.com>  Wed, 01 Jun 2016 11:31:59 +0200

libpve-common-perl (4.0-65) unstable; urgency=medium

  * run_cli_handler: add no_rpcenv parameter

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 May 2016 11:33:52 +0200

libpve-common-perl (4.0-64) unstable; urgency=medium

  * print_property_string: don't print the default key's name

 -- Proxmox Support Team <support@proxmox.com>  Mon, 23 May 2016 06:26:40 +0200

libpve-common-perl (4.0-63) unstable; urgency=medium

  * show warning when using VLAN 1 on a VLAN aware bridge

 -- Proxmox Support Team <support@proxmox.com>  Wed, 18 May 2016 11:23:27 +0200

libpve-common-perl (4.0-62) unstable; urgency=medium

  * re-enable run_cli, which is still in use

 -- Proxmox Support Team <support@proxmox.com>  Sat, 14 May 2016 11:27:23 +0200

libpve-common-perl (4.0-61) unstable; urgency=medium

  * remove PodParser.pm, implement keyAlias feature (replaces group feature)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 11 May 2016 11:09:29 +0200

libpve-common-perl (4.0-60) unstable; urgency=medium

  * setup_tc_rate_limit: Use run_command instead of system

  * When starting in debug mode, starts the daemon without going
    through systemctl

 -- Proxmox Support Team <support@proxmox.com>  Tue, 03 May 2016 07:05:49 +0200

libpve-common-perl (4.0-59) unstable; urgency=medium

  * Fix #908: cleanup OVS ports in tap_unplug

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Apr 2016 06:37:15 +0200

libpve-common-perl (4.0-58) unstable; urgency=medium

  * Add validate_ssh_public_keys

  * Handle string parameter to file content replacement

  * Tools: add sendmail

  * Tools: add tempfile and tempfile_contents

  * fix O_PATH value

 -- Proxmox Support Team <support@proxmox.com>  Tue, 05 Apr 2016 06:28:45 +0200

libpve-common-perl (4.0-57) unstable; urgency=medium

  * fix #923: uninitalized value in remove_lock

  * new PVE::RESTHandler::dump_properties

  * generate_typetext: handle enums and booleans automatically

  * property strings: introduce key grouping feature

 -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Apr 2016 07:15:56 +0200

libpve-common-perl (4.0-56) unstable; urgency=medium

  * add the 'urlencoded' string format

  * property strings: check for commas in values

 -- Proxmox Support Team <support@proxmox.com>  Mon, 21 Mar 2016 08:47:06 +0100

libpve-common-perl (4.0-55) unstable; urgency=medium

  * add missing check for undef in is_mounted

 -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Mar 2016 16:48:19 +0100

libpve-common-perl (4.0-54) unstable; urgency=medium

  * net: don't die in get_active_interfaces() and try both address families

 -- Proxmox Support Team <support@proxmox.com>  Tue, 15 Mar 2016 06:45:55 +0100

libpve-common-perl (4.0-53) unstable; urgency=medium

  * net: tap_plug() needs to apply rate limiting

  * network: tap_rate_limit: fix uninitialized value

 -- Proxmox Support Team <support@proxmox.com>  Tue, 08 Mar 2016 15:51:12 +0100

libpve-common-perl (4.0-52) unstable; urgency=medium

  * AbstractConfig: Decide whether volume is added as unused in subclass

  * AbstractConfig: Introduce __snapshot_create_vol_snapshots_hook

 -- Proxmox Support Team <support@proxmox.com>  Tue, 08 Mar 2016 11:34:24 +0100

libpve-common-perl (4.0-51) unstable; urgency=medium

  * Add AbstractConfig base class

 -- Proxmox Support Team <support@proxmox.com>  Thu, 03 Mar 2016 10:12:26 +0100

libpve-common-perl (4.0-50) unstable; urgency=medium

  * Add since and until parameter to dump_journal

  * pod: generate property string documentation

 -- Proxmox Support Team <support@proxmox.com>  Wed, 02 Mar 2016 06:23:24 +0100

libpve-common-perl (4.0-49) unstable; urgency=medium

  * schema: error on missing keys without default keys

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 Feb 2016 09:40:35 +0100

libpve-common-perl (4.0-48) unstable; urgency=medium

  * added syncfs syscall and sync_mountpoint helper

  * Applying: schema: disable additional properties in property strings

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Feb 2016 11:24:34 +0100

libpve-common-perl (4.0-47) unstable; urgency=medium

  * Implement refcounting for flocks

  * CLIHandler: add missing use PVE::INotify

  * Fix #882: active state of interfaces depends on ipv6

 -- Proxmox Support Team <support@proxmox.com>  Wed, 10 Feb 2016 11:13:32 +0100

libpve-common-perl (4.0-46) unstable; urgency=medium

  * add upid_wait method

  * SectionConfig: disable duplicate plugin registration

  * Tools: add setns system call

 -- Proxmox Support Team <support@proxmox.com>  Wed, 27 Jan 2016 16:55:45 +0100

libpve-common-perl (4.0-45) unstable; urgency=medium

  * network: fix uninitialized value error

 -- Proxmox Support Team <support@proxmox.com>  Mon, 18 Jan 2016 16:54:06 +0100

libpve-common-perl (4.0-44) unstable; urgency=medium

  * network : add trunks support

 -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Jan 2016 17:26:05 +0100

libpve-common-perl (4.0-43) unstable; urgency=medium

  * Fix #861: use safer sprintf formatting

 -- Proxmox Support Team <support@proxmox.com>  Fri, 08 Jan 2016 12:50:43 +0100

libpve-common-perl (4.0-42) unstable; urgency=medium

  * bash completion: allow fall back to default completion

  * lock_file_full: output also lockname if it cannot be acquired

 -- Proxmox Support Team <support@proxmox.com>  Sat, 19 Dec 2015 09:06:24 +0100

libpve-common-perl (4.0-41) unstable; urgency=medium

  * Daemon: don't clear CLOEXEC on daemon sockets

 -- Proxmox Support Team <support@proxmox.com>  Mon, 07 Dec 2015 11:17:21 +0100

libpve-common-perl (4.0-40) unstable; urgency=medium

  * run_command: return exit code and add noerr option

 -- Proxmox Support Team <support@proxmox.com>  Mon, 30 Nov 2015 13:00:15 +0100

libpve-common-perl (4.0-39) unstable; urgency=medium

  * add function file_copy

  * print_property_string: skip keys early

 -- Proxmox Support Team <support@proxmox.com>  Thu, 26 Nov 2015 08:09:04 +0100

libpve-common-perl (4.0-38) unstable; urgency=medium

  * Network setup: avoid access to undefinded var $tag

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Nov 2015 06:24:53 +0100

libpve-common-perl (4.0-37) unstable; urgency=medium

  * ProcFSTools: implement conforming parse_mounts

 -- Proxmox Support Team <support@proxmox.com>  Fri, 13 Nov 2015 11:16:33 +0100

libpve-common-perl (4.0-36) unstable; urgency=medium

  * Tools::df: fork and use Filesys::Df

  * print_property_string: skip undefined values

  * fix CLONE constant declaration

  * Tools: make unshare behave like other perl syscalls

 -- Proxmox Support Team <support@proxmox.com>  Fri, 30 Oct 2015 07:03:50 +0100

libpve-common-perl (4.0-35) unstable; urgency=medium

  * read_prox_net_ipv6_route fixes

 -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Oct 2015 12:13:55 +0200

libpve-common-perl (4.0-34) unstable; urgency=medium

  * network: IP_from_cidr and is_ip_in_cidr helpers

  * half-revert: remove autostart property from bridge ports

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Oct 2015 11:14:12 +0200

libpve-common-perl (4.0-33) unstable; urgency=medium

  * allow /32 ipv4 cidrs

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Oct 2015 09:53:52 +0200

libpve-common-perl (4.0-32) unstable; urgency=medium

  * print_property_string: disk-size is a format, not a type

  * Shorter implementation of random_ether_addr()

 -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Oct 2015 12:22:14 +0200

libpve-common-perl (4.0-31) unstable; urgency=medium

  * parse_property_string: add newline to error strings

 -- Proxmox Support Team <support@proxmox.com>  Fri, 09 Oct 2015 08:43:47 +0200

libpve-common-perl (4.0-30) unstable; urgency=medium

  * depend on libclone-perl

  * api_clone_schema: use Clone::clone instead of Storable::dclone

 -- Proxmox Support Team <support@proxmox.com>  Wed, 07 Oct 2015 08:52:09 +0200

libpve-common-perl (4.0-29) unstable; urgency=medium

  * INotify::read_etc_resolv_conf: ipv6 support

 -- Proxmox Support Team <support@proxmox.com>  Mon, 05 Oct 2015 12:32:00 +0200

libpve-common-perl (4.0-28) unstable; urgency=medium

  * run_cli_handler: add no_init parameter for lxc mount hook

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Oct 2015 13:42:37 +0200

libpve-common-perl (4.0-27) unstable; urgency=medium

  * CLIHandler: fix manpage for method using 'password' handlers.

  * run_cli_handler: replaces run_cli()
  
 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Oct 2015 10:43:14 +0200

libpve-common-perl (4.0-26) unstable; urgency=medium

  * added JSONSchema::print_property_string

  * JSONSchema: added disk-size format

  * Added PVE::JSONSchema::parse_size/format_size

  * Support named formats in typetext generation

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Oct 2015 11:26:11 +0200

libpve-common-perl (4.0-25) unstable; urgency=medium

  * read|write network interfaces : add support for vlan interfaces

 -- Proxmox Support Team <support@proxmox.com>  Fri, 25 Sep 2015 07:03:01 +0200

libpve-common-perl (4.0-24) unstable; urgency=medium

  * JSONSchema: verify comma-separated property strings

  * JSONSchema: pve-ipv4/6-config and CIDR split

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Sep 2015 08:20:44 +0200

libpve-common-perl (4.0-23) unstable; urgency=medium

  * support QinQ / vlan stacking

  * improve bash completion

  * Tools: add unshare system call

  * Allow top level devel domain name up to 63 characters in email adresse

 -- Proxmox Support Team <support@proxmox.com>  Mon, 21 Sep 2015 12:11:17 +0200

libpve-common-perl (4.0-22) unstable; urgency=medium

  * Tools::run_command: support command pipes (array of arrays)

  * Tools::run_command: add documentation

  * parse/set bridge_vlan_aware flag

 -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Sep 2015 09:11:29 +0200

libpve-common-perl (4.0-21) unstable; urgency=medium

  * remove autostart property from bridge ports

  * CLIHandler: allow binaries with '-' in command name

 -- Proxmox Support Team <support@proxmox.com>  Tue, 15 Sep 2015 09:04:01 +0200

libpve-common-perl (4.0-20) unstable; urgency=medium

  * avoid Exporter warning with Cwd

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Sep 2015 09:13:11 +0200

libpve-common-perl (4.0-19) unstable; urgency=medium

  * add missing formatter property to method schema

  * CLIHandler: add helper to generate bash completion (and config)

  * add helpers to verify API without starting the binary

  * remove + from getopt's prefix_pattern

  * new helpers: read_proc_mounts and is_mounted

 -- Proxmox Support Team <support@proxmox.com>  Tue, 08 Sep 2015 07:16:47 +0200

libpve-common-perl (4.0-18) unstable; urgency=medium

  * added 'extra-args' CLI handling

  * add bash completion handler

 -- Proxmox Support Team <support@proxmox.com>  Tue, 01 Sep 2015 17:47:18 +0200

libpve-common-perl (4.0-17) unstable; urgency=medium

  * Added PVE::Network::tcp_ping to replace Net::Ping

  * Tools::run_with_timeout improvement + hires alarm

  * Add generic parse_host_and_port function

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Aug 2015 11:37:10 +0200

libpve-common-perl (4.0-16) unstable; urgency=medium

  * fix bug #860: fix tc rate control

 -- Proxmox Support Team <support@proxmox.com>  Mon, 17 Aug 2015 09:43:41 +0200

libpve-common-perl (4.0-15) unstable; urgency=medium

  * add tap device name parse fix

 -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Aug 2015 09:06:28 +0200

libpve-common-perl (4.0-14) unstable; urgency=medium

  * get_standard_option: do not overwrite defaults when they evaluate to false
  
 -- Proxmox Support Team <support@proxmox.com>  Tue, 04 Aug 2015 08:59:48 +0200

libpve-common-perl (4.0-13) unstable; urgency=medium

  * fix tap_plug with vlan for non aware vlan bridges

 -- Proxmox Support Team <support@proxmox.com>  Mon, 03 Aug 2015 16:13:33 +0200

libpve-common-perl (4.0-12) unstable; urgency=medium

  * tap_plug : add support for vlan aware linux bridge

  * replace /sbin/vconfig with /sbin/ip call
  
 -- Proxmox Support Team <support@proxmox.com>  Thu, 30 Jul 2015 08:59:52 +0200

libpve-common-perl (4.0-11) unstable; urgency=medium

  * add ProcFSTools::read_proc_net_ipv6_route

  * added constants: ipv4_reverse_mask and ipv4_mask_hash_localnet 

 -- Proxmox Support Team <support@proxmox.com>  Mon, 27 Jul 2015 13:12:28 +0200

libpve-common-perl (4.0-10) unstable; urgency=medium

  * add veth_create and veth_delete

 -- Proxmox Support Team <support@proxmox.com>  Fri, 26 Jun 2015 11:50:24 +0200

libpve-common-perl (4.0-9) unstable; urgency=medium

  * add IPv6 support for /etc/network/interfaces

 -- Proxmox Support Team <support@proxmox.com>  Fri, 26 Jun 2015 07:56:05 +0200

libpve-common-perl (4.0-8) unstable; urgency=medium

  * PVE::Daemon now calls systemctl for start/stop/restart

 -- Proxmox Support Team <support@proxmox.com>  Fri, 19 Jun 2015 07:23:46 +0200

libpve-common-perl (4.0-7) unstable; urgency=medium

  * new helper dump_journal to view systemd journal

 -- Proxmox Support Team <support@proxmox.com>  Tue, 09 Jun 2015 12:16:24 +0200

libpve-common-perl (4.0-6) unstable; urgency=medium

  * add trigger for pve-api-updates

 -- Proxmox Support Team <support@proxmox.com>  Mon, 01 Jun 2015 13:18:00 +0200

libpve-common-perl (4.0-5) unstable; urgency=medium

  * defer some daemon setup routines

 -- Proxmox Support Team <support@proxmox.com>  Thu, 28 May 2015 18:07:34 +0200

libpve-common-perl (4.0-4) unstable; urgency=medium

  *  spice-proxy format now uses new address format

 -- Proxmox Support Team <support@proxmox.com>  Wed, 27 May 2015 15:33:40 +0200

libpve-common-perl (4.0-3) unstable; urgency=medium

  * add utility to fetch the socket family for a hostname

  * provide Tools::unpack_sockaddr_in46

  * new helper: getaddrinfo_all

  * add a socket family argument to next_*_port functions

 -- Proxmox Support Team <support@proxmox.com>  Fri, 08 May 2015 12:37:55 +0200

libpve-common-perl (4.0-2) unstable; urgency=medium

  * register new standard option 'pve-startup-order'

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Apr 2015 09:56:10 +0200

libpve-common-perl (4.0-1) unstable; urgency=medium

  * bump version for Debian Jessie

 -- Proxmox Support Team <support@proxmox.com>  Thu, 26 Feb 2015 11:18:57 +0100

libpve-common-perl (3.0-24) unstable; urgency=low

  * next_migrate_port: higher port range 

  * next_unused_port: test with bind to all IPs
  
 -- Proxmox Support Team <support@proxmox.com>  Wed, 11 Feb 2015 06:37:44 +0100

libpve-common-perl (3.0-23) unstable; urgency=low

  * read_etc_network_interfaces : don't always add vmbr0

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Feb 2015 07:01:58 +0100

libpve-common-perl (3.0-22) unstable; urgency=low

  * implement pre-fork daemon

 -- Proxmox Support Team <support@proxmox.com>  Thu, 08 Jan 2015 14:49:37 +0100

libpve-common-perl (3.0-21) unstable; urgency=low

  * add abstract class to implement daemons

 -- Proxmox Support Team <support@proxmox.com>  Wed, 17 Dec 2014 14:49:18 +0100

libpve-common-perl (3.0-20) unstable; urgency=low

  * create_firewall_bridge_ovs : activate ovsint interface

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Dec 2014 06:36:17 +0100

libpve-common-perl (3.0-19) unstable; urgency=low

  * new helper register_page_formater

 -- Proxmox Support Team <support@proxmox.com>  Tue, 06 May 2014 09:40:19 +0200

libpve-common-perl (3.0-18) unstable; urgency=low

  * speedup find_handler

 -- Proxmox Support Team <support@proxmox.com>  Thu, 24 Apr 2014 14:12:40 +0200

libpve-common-perl (3.0-17) unstable; urgency=low

  * dump_logfile: add filter regex

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Apr 2014 07:20:57 +0200

libpve-common-perl (3.0-16) unstable; urgency=low

  * register new standard option pve-config-digest
  
  * move assert_if_modified to PVE::Tools

 -- Proxmox Support Team <support@proxmox.com>  Thu, 10 Apr 2014 09:49:30 +0200

libpve-common-perl (3.0-15) unstable; urgency=low

  * Add support for bridges with more than one physical link

 -- Proxmox Support Team <support@proxmox.com>  Wed, 19 Mar 2014 06:52:11 +0100

libpve-common-perl (3.0-14) unstable; urgency=low

  * correctly copy bridge config for vlan bridges

 -- Proxmox Support Team <support@proxmox.com>  Wed, 26 Feb 2014 07:50:47 +0100

libpve-common-perl (3.0-13) unstable; urgency=low

  * improve random MAC address generation

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Jan 2014 07:37:14 +0100

libpve-common-perl (3.0-12) unstable; urgency=low

  * add support for openvswitch network configuration

 -- Proxmox Support Team <support@proxmox.com>  Fri, 27 Dec 2013 09:39:39 +0100

libpve-common-perl (3.0-11) unstable; urgency=low

  * add openvswitch support to tap_plug / tap_unplug
  
  * register CIDR format

  * register standard options for SPICE
  
 -- Proxmox Support Team <support@proxmox.com>  Sat, 21 Dec 2013 09:03:07 +0100

libpve-common-perl (3.0-10) unstable; urgency=low

  * wait_for_vnc_port: avoid unnecessarry delay by using usleep
  
  * new helper next_spice_port()

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Dec 2013 13:16:55 +0100

libpve-common-perl (3.0-9) unstable; urgency=low

  * export regular expressions for IPv4 and IPv6 addresses
  
  * fix upid parser for long uptimes (> 497 days)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 30 Oct 2013 12:45:52 +0100

libpve-common-perl (3.0-8) unstable; urgency=low

  * do not use 'intl' variant for en an gb keyboard layouts

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Oct 2013 06:56:44 +0200

libpve-common-perl (3.0-7) unstable; urgency=low

  * use warnings everywhere.

 -- Proxmox Support Team <support@proxmox.com>  Tue, 01 Oct 2013 13:20:15 +0200

libpve-common-perl (3.0-6) unstable; urgency=low

  * auth.conf: avoid warning if file does not exist, fix file permissions

 -- Proxmox Support Team <support@proxmox.com>  Mon, 05 Aug 2013 07:57:16 +0200

libpve-common-perl (3.0-5) unstable; urgency=low

  * add parser for "/etc/apt/auth.conf"

 -- Proxmox Support Team <support@proxmox.com>  Thu, 25 Jul 2013 09:57:55 +0200

libpve-common-perl (3.0-4) unstable; urgency=low

  * fix bug #381: use persistent reservation file for ports

  * new function PVE::Tools::next_migrate_port()

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 May 2013 07:23:35 +0200

libpve-common-perl (3.0-3) unstable; urgency=low

  * fix date in copyright message

 -- Proxmox Support Team <support@proxmox.com>  Wed, 08 May 2013 10:55:00 +0200

libpve-common-perl (3.0-2) unstable; urgency=low

  * implement shared file locks

 -- Proxmox Support Team <support@proxmox.com>  Mon, 06 May 2013 11:49:10 +0200

libpve-common-perl (3.0-1) unstable; urgency=low

  * start 3.0 development

 -- Proxmox Support Team <support@proxmox.com>  Tue, 05 Mar 2013 11:43:46 +0100

libpve-common-perl (1.0-48) unstable; urgency=low

  * depend on libnet-ip-perl

  * Improved ipv4 addresses validation
  
 -- Proxmox Support Team <support@proxmox.com>  Mon, 25 Feb 2013 06:20:10 +0100

libpve-common-perl (1.0-47) unstable; urgency=low

  * fix bug #335: correctly verify ipv4 network masks

 -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Feb 2013 09:13:35 +0100

libpve-common-perl (1.0-46) unstable; urgency=low

  * revert vlan changes
  
  * add parser for /etc/iscsi/initiatorname.iscsi

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Feb 2013 10:57:20 +0100

libpve-common-perl (1.0-45) unstable; urgency=low

  * read_meminfo: query KSM page sharing
  
  * revert tc rate filter changes: they do not work as expected

 -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Feb 2013 09:04:27 +0100

libpve-common-perl (1.0-44) unstable; urgency=low

  * vlan changes: use ip command instead of old vconfig, activate gvrp 
  by default, use bridge instead of raw ethernet device as vlan bridge

 -- Proxmox Support Team <support@proxmox.com>  Mon, 28 Jan 2013 11:57:33 +0100

libpve-common-perl (1.0-43) unstable; urgency=low

  * tc: use rate filter with mtu 64k (instead of avrate)

 -- Proxmox Support Team <support@proxmox.com>  Mon, 28 Jan 2013 06:59:32 +0100

libpve-common-perl (1.0-41) unstable; urgency=low

  * correctly count physical sockets

 -- Proxmox Support Team <support@proxmox.com>  Mon, 31 Dec 2012 08:24:40 +0100

libpve-common-perl (1.0-40) unstable; urgency=low

  * run_command: implement afterfork callback

 -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Dec 2012 12:50:12 +0100

libpve-common-perl (1.0-39) unstable; urgency=low

  * remove hardcoded blowfish cipher

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 Oct 2012 13:55:06 +0100

libpve-common-perl (1.0-38) unstable; urgency=low

  * fix bug #273: retry flock if it fails with EINTR

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 Oct 2012 08:21:43 +0100

libpve-common-perl (1.0-37) unstable; urgency=low

  * fix bug #264: use option pipefail for shell commands

 -- Proxmox Support Team <support@proxmox.com>  Mon, 29 Oct 2012 09:45:11 +0100

libpve-common-perl (1.0-36) unstable; urgency=low

  * new helper wait_for_vnc_port()

 -- Proxmox Support Team <support@proxmox.com>  Wed, 24 Oct 2012 08:21:04 +0200

libpve-common-perl (1.0-35) unstable; urgency=low

  * fix bug in read_memory_usage

 -- Proxmox Support Team <support@proxmox.com>  Mon, 15 Oct 2012 06:32:30 +0200

libpve-common-perl (1.0-34) unstable; urgency=low

  * file_read_firstline: avoid warning with empty files

 -- Proxmox Support Team <support@proxmox.com>  Tue, 02 Oct 2012 08:05:10 +0200

libpve-common-perl (1.0-33) unstable; urgency=low

  * fix run_command: restore umask correctly

 -- Proxmox Support Team <support@proxmox.com>  Wed, 26 Sep 2012 13:16:22 +0200

libpve-common-perl (1.0-32) unstable; urgency=low

  * fix typo in error message

 -- Proxmox Support Team <support@proxmox.com>  Tue, 25 Sep 2012 06:08:02 +0200

libpve-common-perl (1.0-31) unstable; urgency=low

  * minor fix: remove debug output

 -- Proxmox Support Team <support@proxmox.com>  Tue, 11 Sep 2012 09:22:13 +0200

libpve-common-perl (1.0-30) unstable; urgency=low

  * allow more that 10 physical network interfaces

 -- Proxmox Support Team <support@proxmox.com>  Thu, 02 Aug 2012 07:28:17 +0200

libpve-common-perl (1.0-29) unstable; urgency=low

  * AbsrtactMigrate: use rsync flags AX (preserve ACLs and xattr)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 14 Jun 2012 09:08:11 +0200

libpve-common-perl (1.0-28) unstable; urgency=low

  * added SectionConfig.pm, base class for Storage and Auth plugins.

 -- Proxmox Support Team <support@proxmox.com>  Wed, 16 May 2012 07:18:53 +0200

libpve-common-perl (1.0-27) unstable; urgency=low

  * fix bug #172: use DNS compatible regex in upid parser

 -- Proxmox Support Team <support@proxmox.com>  Fri, 20 Apr 2012 08:31:44 +0200

libpve-common-perl (1.0-26) unstable; urgency=low

  * add Turkish keyboard mappings

 -- Proxmox Support Team <support@proxmox.com>  Wed, 11 Apr 2012 08:35:13 +0200

libpve-common-perl (1.0-25) unstable; urgency=low

  * fix bug #135: use DNS compatible naming for 'pve-node'

 -- Proxmox Support Team <support@proxmox.com>  Mon, 02 Apr 2012 14:10:45 +0200

libpve-common-perl (1.0-24) unstable; urgency=low

  * fix bug #135: allow single letter 'dns-name', allow to start names
    with numbers

 -- Proxmox Support Team <support@proxmox.com>  Mon, 02 Apr 2012 12:04:02 +0200

libpve-common-perl (1.0-23) unstable; urgency=low

  * moved dir_glob_regex() and dir_glob_foreach() from PVE::Storage 
  to PVE::Tools
  
  * add vlan setup code to PVE::Network
  
 -- Proxmox Support Team <support@proxmox.com>  Wed, 28 Mar 2012 07:56:49 +0200

libpve-common-perl (1.0-22) unstable; urgency=low

  * return number of sockets in read_cpuinfo

 -- Proxmox Support Team <support@proxmox.com>  Mon, 26 Mar 2012 07:53:35 +0200

libpve-common-perl (1.0-21) unstable; urgency=low

  * use Digest::SHA instead of Digest::SHA1

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Mar 2012 11:21:02 +0100

libpve-common-perl (1.0-20) unstable; urgency=low

  * fix bug #116, #103: try to keep ordering in /etc/network/interfaces

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Mar 2012 13:30:07 +0100

libpve-common-perl (1.0-19) unstable; urgency=low

  * add dns-name format

 -- Proxmox Support Team <support@proxmox.com>  Mon, 12 Mar 2012 12:31:27 +0100

libpve-common-perl (1.0-18) unstable; urgency=low

  * try to keep ordering in /etc/network/interfaces

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Mar 2012 12:33:34 +0100

libpve-common-perl (1.0-17) unstable; urgency=low

  * better error message for usermod command

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Mar 2012 12:42:30 +0100

libpve-common-perl (1.0-16) unstable; urgency=low

  * try to keep comments in /etc/network/interfaces

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Mar 2012 09:49:22 +0100

libpve-common-perl (1.0-15) unstable; urgency=low

  * add Swedish keymap

 -- Proxmox Support Team <support@proxmox.com>  Mon, 27 Feb 2012 09:46:36 +0100

libpve-common-perl (1.0-14) unstable; urgency=low

  * increase version to 1.0-14 for RC1

 -- Proxmox Support Team <support@proxmox.com>  Thu, 16 Feb 2012 15:12:15 +0100

libpve-common-perl (1.0-13) unstable; urgency=low

  * correctly decode utf8 CLI parameters.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Jan 2012 14:04:03 +0100

libpve-common-perl (1.0-12) unstable; urgency=low

  * new helper kvmkeymaplist()

  * fix bug 77: only use cmd2string when necessary
  
 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Jan 2012 11:44:11 +0100

libpve-common-perl (1.0-11) unstable; urgency=low

  * new helper run_with_timeout()

 -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Dec 2011 11:25:01 +0100

libpve-common-perl (1.0-10) unstable; urgency=low

  * add helpers to implement migration

 -- Proxmox Support Team <support@proxmox.com>  Thu, 08 Dec 2011 11:03:54 +0100

libpve-common-perl (1.0-9) unstable; urgency=low

  * bug fixes for run_command()

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Dec 2011 10:28:27 +0100

libpve-common-perl (1.0-8) unstable; urgency=low

  * make cli argument parser more flexible

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Nov 2011 08:36:30 +0100

libpve-common-perl (1.0-7) unstable; urgency=low

  * bug fixes (see git log)

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Nov 2011 10:07:38 +0100

libpve-common-perl (1.0-6) unstable; urgency=low

  * add PVE::Tools::random_ether_addr()

 -- Proxmox Support Team <support@proxmox.com>  Wed, 05 Oct 2011 09:19:39 +0200

libpve-common-perl (1.0-5) unstable; urgency=low

  * cleanups (prepare for beta release)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Aug 2011 07:23:00 +0200

libpve-common-perl (1.0-4) unstable; urgency=low

  * CLIHandler.pm: new command 'printmanpod' to generate manual pages.

 -- Proxmox Support Team <support@proxmox.com>  Wed, 10 Aug 2011 10:17:55 +0200

libpve-common-perl (1.0-3) unstable; urgency=low

  * fix CLIHandler.pm

 -- Proxmox Support Team <support@proxmox.com>  Fri, 05 Aug 2011 12:40:17 +0200

libpve-common-perl (1.0-2) unstable; urgency=low

  * depend on liburi-perl

 -- Proxmox Support Team <support@proxmox.com>  Thu, 14 Jul 2011 12:03:37 +0200

libpve-common-perl (1.0-1) unstable; urgency=low

  * initial package

 -- Proxmox Support Team <support@proxmox.com>  Mon, 09 Aug 2010 14:54:24 +0200